Appendix A. CRU instructions
6Remove the frame fixing screws.
5
5
7Release the cables from the cable guides of the hard disk drive frame and pull the tab in the direction shown by arrow g.
7
6
6
8Take out the hard disk drive secured in the hard disk drive bay.
9Remove the screws and detach the metal frame from the hard disk drive.
0 Attach the metal frame to a new hard disk drive; then tighten the screws.
APut the hard disk drive gently into the hard disk drive bay with the tab facing upwards and the connectors facing each other; then push it firmly into space.
BReinstall the frame fixing screws.
CReinstall the base cover and the keyboard. D Reinstall the battery pack.
ETurn the computer over again. Connect the AC adapter and the cables to the computer again.
33