Operation Controls, IN/OUT DIN Jacks, AC Inlet

3.0

OPERATION AND

CONTROLS

8. IN/OUT DIN Jacks

If you are using the amplifier as part of a JBL Synthesis System, it is necessary to use these jacks to interconnect to other system components, so that control signals (power on/off and music/cinema mode switching) can be transmitted from one unit to the next, starting at the surround processor, through the equalizer and amplifiers, and ending at the speakers. Follow the connection diagrams on the following pages corresponding to the appropriate Synthesis system for detailed information regarding these connections. Make connections to these jacks only as shown in the diagrams. If these jacks are used in any other manner, e.g., to control electric screens, the unit can be damaged and the warranty will be void. For specific electrical information on these jacks, contact JBL Synthesis Customer Service at (800) 336-4JBL.

Do not plug anything into these jacks if you are not using the S7150 with a JBL Synthesis System.

9. Speaker Mode Control Connectors

The front left and front right speakers are switched between Music and Cinema modes by signals present at both the DIN connectors (as described in the previous paragraph) AND the 2-conductor connectors shown at (9).

OPERATION3.0AND

CONTROLS

The installer may find it preferable to use 2-conductor wire (18 gage recommended) rather than long multi- conductor DIN cables for the mode-switching connection between the S7150 and these two speakers. Adapters supplied with the S7150 are used at the speaker end of the wire to allow connection to the speakers' DIN input connectors. Proper polarity must be observed as shown in the wiring diagrams; reverse the connections at one end of the wire if the speaker(s) do not switch modes (from horn (Cinema) to tweeter (Music)).

Note that 5-conductor DIN cables MUST be used between all other components to allow correct power and mode switching and that the same warning as in

(8)applies here; do not attempt to use these jacks to control anything other than the mode-switching function of Synthesis speakers, as this may damage the S7150 and will void the warranty.

10. AC Inlet

Your S7150 is shipped with an IEC-type removable power cord that mates with the AC inlet on the rear panel. To ensure proper operation, use the supplied power cord. This amplifier is NOT a multi-voltage unit; using a power cord with a different connection to the AC wall receptacle will void the warranty.

S7150 specifications

The JBL S7150 is a powerful and innovative floor-standing loudspeaker that caters to audiophiles and music enthusiasts alike. This speaker offers a premium audio experience thanks to its cutting-edge technologies, stylish design, and exceptional performance.

One of the most notable features of the JBL S7150 is its advanced driver technology. The speaker is equipped with a large 8-inch low-frequency driver that delivers deep, resonant bass without distortion, allowing users to feel the full impact of their favorite music or movies. Complementing this is a sophisticated 5-inch midrange driver that ensures a smooth transition of sound frequencies, making vocals and instruments sound natural and lifelike. The high-frequency performance is managed by a 1-inch tweeter, which provides crystal-clear highs, ensuring that every detail in a track is heard.

In addition to its high-quality drivers, the JBL S7150 incorporates patented technologies that enhance audio performance. The speaker features Optimized Waveguide Technology that broadens the sweet spot for listening, allowing for a more immersive experience regardless of where the listener is sitting. This technology also minimizes distortion and enhances clarity at higher volumes, making the S7150 an excellent choice for larger rooms or home theater setups.

Connectivity options are another strength of the JBL S7150. It supports both wired and wireless connections, making it easy to pair with various devices. Users can connect via Bluetooth, allowing them to stream music directly from their smartphones or tablets. Additionally, the speaker has standard audio inputs that accommodate traditional audio sources such as CD players and turntables.

The design of the JBL S7150 is sleek and modern, making it an elegant addition to any home. It features a durable cabinet construction that reduces resonance, and the premium finish gives it a sophisticated look that complements various interior styles. The speaker also comes with adjustable feet, ensuring stability and optimal placement in any room.

Overall, the JBL S7150 stands out in the market for its impressive sound quality, advanced technology, and aesthetic appeal. Whether one is listening to music, watching movies, or playing video games, the S7150 delivers an outstanding audio experience that is sure to impress even the most discerning listeners.