Lenovo B570, V570 manual General safety

Page 6

Lenovo V570/B570 Hardware Maintenance Manual

General safety

Follow these rules below to ensure general safety:

Observe a good housekeeping in the area where the machines are put during and after the maintenance.

When lifting any heavy object:

1.Make sure that you can stand safely without slipping.

2.Distribute the weight of the object equally between your feet.

3.Use a slow lifting force. Never move suddenly or twist when you attempt to lift it.

4.Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.

Do not perform any action that causes hazards to the customer, or that makes the machine unsafe.

Before you start the machine, make sure that other service representatives and the customer are not in a hazardous position.

Place removed covers and other parts in a safe place, keeping them away from all personnel, while you are servicing the machine.

Keep your toolcase away from walk areas so that other people will not trip it over.

Do not wear loose clothing that can be trapped in the moving parts of the machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with the nonconductive clip, about 8 centimeters (3 inches) from the end.

Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing.

Attention: Metal objects are good electrical conductors.

Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that may be hazardous to your eyes.

After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.

Reinstall all covers correctly before returning the machine to the customer.

Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.

2

Image 6
Contents Lenovo V570/B570 Page Contents About this manual Lenovo V570/B570Safety information General safety Electrical safety Lenovo V570/B570 Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notices multilingual translations Safety noticeLenovo V570/B570 Hardware Maintenance Manual Safety information Lenovo V570/B570 Hardware Maintenance Manual Safety information Lenovo V570/B570 Hardware Maintenance Manual Safety information Laser compliance statement Safety information Before replacing parts Strategy for replacing FRUsStrategy for replacing a hard disk drive Important notice for replacing a system boardImportant information about replacing RoHS compliant FRUs Original partGeneral checkout Following are not covered under warranty What to do firstPower system checkout Checking the AC adapterChecking operational charging Checking the battery pack Related service information Restoring the factory contents by using OneKey RecoveryPasswords Power-on passwordSupervisor password Power management Screen blank modeSleep standby mode Hibernation mode Specifications Feature DescriptionWlan Status indicators Off Indicator MeaningBlinking white Flashing whiteFn key combinations Key combination DescriptionPlastic to plastic FRU replacement noticesScrew notices Logic card to plasticRemoving and replacing an FRU Battery pack Removal steps of battery packDummy card Removal steps of dummy cardsStep Screw quantity Color Torque Hard disk drive Removal steps of hard disk driveOptical drive Removal steps of optical driveDimm Removal steps of DimmPCI Express Mini Card for wireless LAN/WAN Removal steps of PCI Express Mini Card for wireless LAN/WANWhen installing Keyboard Removal steps of keyboardLenovo V570/B570 Lenovo V570/B570 Hardware Maintenance Manual Keyboard bezel Removal steps of keyboard bezelRemove the screw c Lenovo V570/B570 M2 × 3.5 mm, flat-head, nylok-coated Black Kgfcm System board Important notices for handling the system boardRemoval steps of system board Lenovo V570/B570 LCD unit Removal steps of LCD unitRemove the LCD unit in the direction shown by arrows c Fan assembly and Heat Sink assembly Removal steps of fan assembly and heat sink assemblyLenovo V570/B570 1130 CPU Removal steps of CPUBase cover, speakers and bluetooth card Lenovo V570/B570 Hardware Maintenance Manual LCD front bezel Removal steps of LCD front bezelLCD panel, LCD cable and hinges Removal steps of LCD panel, LCD cable and hingesM2 × 2.5, flat-head, nylokcoated Black Kgfcm Lenovo V570/B570 Hardware Maintenance Manual Integrated camera Removal steps of integrated cameraAntenna assembly and LCD cover Removal steps of antenna assembly and LCD coverLocations Front viewRight-side view Bottom and Left-side view Parts list Overall Parts list-Overall Pcie NB HMC LA57 Lower Case UMA W/SPEAKER&DC-IN TBD LCD FRUs 15.6-in. HD TFT Keyboard Lenovo V570/B570 Parts list-Miscellaneous parts Miscellaneous partsParts list-3-pin AC adapters AC adaptersPower cords Parts list-3-pin power cordsLongwell LP-46+H03VV-F+LS-18 1m Israel Lenovo V570/B570 Hardware Maintenance Manual Page Trademarks