Controls, Manual On/Auto On Switch, In/Out DIN Jacks

7. Manual On/Auto On Switch

Put this switch in the Auto On position if the amplifier is being used as part of a JBL Synthesis system. When used in this way, the S5160 will automatically turn on when the Power switch is depressed and the surround processor is activated. For other installations, or should individual control of each component be desired, put this switch in the Manual On position. The amplifier will then be controlled solely by the front-panel switch.

8. In/Out DIN Jacks

If you are using the amplifier as part of a JBL Synthesis system, it is necessary to use these jacks to interconnect to other system components so that control signals (Power On/Off and Music/Cinema mode switching) can be trans- mitted from one unit to the next, starting at the surround processor, through the equalizer and amplifiers, and ending at the speakers. Follow the connection diagrams on the following pages for detailed information regarding these connections. Make connections to these jacks only as shown in the diagrams. If these jacks are used in any other manner, e.g., to control electric screens, the unit can be damaged and the warranty will be void. For specific electrical information on these jacks, contact JBL Synthesis Customer Service at 516.255.4JBL.

Do not plug anything into these jacks if you are not using the S5160 with a JBL Synthesis system.

S51603OPERATION.0AND

CONTROLS

9. Speaker Mode Control Connectors

The front left and front right speakers are switched between Music and Cinema modes by signals present at both the DIN connectors (as described in Section 8) AND the two-conductor connectors shown at ª.

The installer may find it preferable to use two-conductor wire (18-gauge recommended) rather than long multi- conductor DIN cables for the mode-switching connection between the S5160 and these two speakers. Adaptors supplied with the S5160 are used at the speaker end of the wire to allow connection to the speakers’ DIN input connectors. Proper polarity must be observed, as shown in the wiring diagrams; reverse the connections at one end of the wire if the speaker(s) do not switch modes – from horn (Cinema) to tweeter (Music).

Note that five-conductor DIN cables MUST be used between all other components to allow correct power and mode switching, and that the same warning not to plug anything into these jacks if you are not using the S5160 with a JBL Synthesis system applies here; do not attempt to use these jacks to control anything other than the mode-switching function of JBL Synthesis speakers, as this may damage the S5160 and will void the warranty.

10. AC Inlet

Your S5160 is shipped with an IEC-type removable power cord that mates with the AC inlet on the rear panel. To ensure proper operation, use the supplied power cord. This amplifier is NOT a multivoltage unit; using a power cord that is not compatible with a 120V, 60Hz AC wall receptacle will void the warranty.

S5160 specifications

The JBL S5160 is a cutting-edge speaker that embodies innovation and high-quality sound engineering, making it a standout in the competitive audio market. Equipped with advanced technologies and features, it caters to audio enthusiasts who demand performance without compromise.

At the heart of the JBL S5160 is its powerful driver system, engineered to deliver crisp highs and robust lows. This speaker utilizes JBL's proprietary bass technology, which enhances low-frequency response, allowing users to experience deep, resonant bass that brings music and movies to life. The incorporation of a sophisticated tweeter ensures that high frequencies are reproduced with clarity, creating a balanced sound profile that's rich in detail.

One of the key features of the JBL S5160 is its Bluetooth capability, enabling seamless wireless connectivity with compatible devices. This feature allows users to stream music directly from their smartphones, tablets, or computers without the hassle of cables. The speaker’s extended Bluetooth range ensures that users can move freely without sacrificing audio quality.

In terms of design, the JBL S5160 boasts a sleek and stylish appearance that fits perfectly in any modern decor. Its robust casing not only enhances aesthetic appeal but also provides durability for various environments, from home use to outdoor gatherings. The intuitive control panel is user-friendly, allowing easy access to volume adjustments, playback, and pairing functions.

Soundstage is another area where the JBL S5160 excels. The speaker is designed to create an immersive audio experience with a wide soundstage, making it ideal for both casual listening and more involved audio experiences. Whether using it for movies, music, or gaming, users can expect a surround sound effect that draws them into the content.

Finally, the JBL S5160 is equipped with an impressive battery life, allowing for hours of uninterrupted listening. This portability means users can enjoy high-quality sound wherever they are without worrying about frequent recharging.

In summary, the JBL S5160 is a perfect blend of advanced technology, stylish design, and exceptional audio performance. Whether you are an Audiophile or someone who simply loves great sound, the JBL S5160 is engineered to impress and elevate your listening experience.