Lenovo 57315616 manual Enabling ErP compliance mode

Enabling ErP compliance mode

You can enable the energy-related products directive (ErP) compliance mode through the Power menu in the Setup Utility program. This mode reduces electricity consumption when your computer is in standby mode or turned off.

To enable ErP compliance mode in the Setup Utility program, do the following:

1.Repeatedly press and release the F1 key when turning on the computer to start the Setup Utility program.

2.From the Setup Utility program main menu, select Power → ErP and press Enter.

3.Select Enabled and press Enter.

4.Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm.

Note: When ErP compliance mode is enabled, you only can wake up your computer by pressing the power switch.

56User Guide