Lenovo IdeaPad Y460
Figure 14. Removal steps of keyboard bezel and speaker (continued)
Pull out the three antenna cables from the guide hole of the system board in the direction shown by arrows 8 and release them from the cable guides in the direction shown by arrows 9.
8 | 8 |
9 | 9 | 9 |
|
9 | 9 |
|
9 |
9 |
9 |
When installing:
•• Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.
•• Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides.
57