Lenovo V560 manual Removal steps of LCD unit

Lenovo V560/B560

1110 LCD unit

For access, remove these FRUs in order:

•• “1010 Battery pack” on page 34

•• “1020 Dummy card” on page 35

•• “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot compartment cover” on page 36

•• “1040 Hard disk drive” on page 37

•• “1050 Optical drive” on page 38

•• “1060 DIMM” on page 39

•• “1070 PCI Express Mini Card for wireless LAN/WAN” on page 40

•• “1080 Keyboard” on page 42

•• “1090 Keyboard bezel” on page 44

•• “1100 System board” on page 48

Figure 11. Removal steps of LCD unit

Release the antenna cables from the cable guides in the direction shown by arrows 1. Remove two screws 2.

2

2

1

1 1

Step	Screw (quantity)	Color	Torque
2	M2.5 × 8 mm, flat-head, nylok-coated (2)	Black	3.0 kgfcm

When installing:

•• Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken.

•• Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables when you attach the LCD assembly. Route the LCD cable along the cable guides.

51