1130 Fingerprint reader
If the computer you are servicing has the fingerprint reader, follow the following instructions to remove or replace it.
For access, remove these FRUs in order:
•“1010 Bottom cover” on page 58
•“1020 Battery pack” on page 60
•“1030 Hard disk drive or
•“1040 Keyboard” on page 63
•“1070 PCI Express Mini Card for wireless WAN or mSATA
•“1090 Keyboard bezel” on page 72
Removal steps of fingerprint reader
4 | 1 |
2
3
| Step | Screw (quantity) | Color | Torque | |
|
|
|
|
|
|
|
|
| M2 × 3.0 mm, | Black | 0.181 Nm |
| 4 |
| |||
|
|
|
|
| (1.85 |
|
|
|
|
|
|
When installing: Ensure that the end of cable marked with FP is attached firmly to the fingerprint reader, and the end marked with MB is attached firmly to the system board.