Lenovo K430, K410 Post error codes, Undetermined problems, Post Error Message Description/Action

POST error codes

Each time you turn the computer on, it performs a series of tests to check that the system is operating correctly and that certain options are set. This series of tests is called the Power-OnSelf-Test, or POST. POST does the following:

•Checks some basic system-board operations

•Checks that the memory is working correctly

•Starts video operations

•Verifies that the boot drive is working

POST Error Message	Description/Action
Keyboard error	Cannot initialize the keyboard. Make sure the keyboard
	is properly connected to the computer and that no keys
	are held pressed during POST. To purposely configure
	the computer without a keyboard, select Keyboardless
	operation in Startup option to Enabled. The BIOS then
	ignores the missing keyboard during POST.
Reboot and Select proper Boot device or Insert Boot	The BIOS was unable to find a suitable boot device. Make
Media in selected Boot device	sure the boot drive is properly connected to the computer.
	Make sure you have bootable media in the boot device.

Undetermined problems

1.Power-off the computer.

2.Remove or disconnect the following components (if connected or installed) one at a time.

a.External devices (modem, printer, or mouse)

b.Extended video memory

c.External Cache

d.External Cache RAM

e.Hard disk drive

f.Disk drive

3.Power-on the computer to re-test the system.

4.Repeat steps 1 through 3 until you find the failing device or component.

If all devices and components have been removed and the problem continues, replace the system board.

20IdeaCentre K430/K410Hardware Maintenance Manual