Lenovo 40Y8699 manual Read and write of CD and DVD media are supported

To connect the USB 2.0 Super Multi-Burner Drive to your system using self power with AC adapters, do the following:

Figure 1-1. Configuration 1: self power (AC adapter) configuration

Note: The illustration on the left applies to US/Canada/Latin America/Japan.

Note: The illustration on the right applies to all other countries.

1.Turn on your computer.

2.Using the USB cable, insert the cable plug
2 into the USB connector of the drive. Plug the power supply
4 into an outlet.

3.Connect the AC adapter to the DC IN connector
1 on the USB 2.0 Super Multi-Burner Drive.

4.Plug the standard USB connector
3into the USB port of your computer.

Configuration 2: Connecting the drive using standard USB bus power (Limited Speed Operation)

Requirements

vTwo Standard USB cables (shipped with this option).

vTwo free USB ports available on your system.

Specifications

Read and write of CD and DVD media are supported.

Read speeds for Configuration 2

Media	Max speed with USB Standard Bus Power
DVD-ROM (Single layer)	4x CAV
DVD-R (4.7 GB)	4x
DVD+R	4x
CD-ROM	10x
CD-R	10x
CD-RW	10x
CD-DA (DAE)	10x CAV

Chapter 1. USB 2.0 Super Multi-Burner Drive 1-7