Lenovo 6920-AJ1, L192, 6920-AB1, 41A1758, 41A1759, 41A1756, 41A1755 Selecting a supported display mode

Table 2-2. OSD functions (continued)

OSD Icon on Main Menu		Submenu		Description
	Options		Menu Position	Menu position adjusts menu
				location on the screen.
		Default		Default returns the menu
				position to the default settings.
		Custom		v	Horizontal: Changes the
					horizontal position of the OSD.
				v Vertical: Changes the vertical
					position of the OSD.
				v	Save
			Factory Reset	v	Cancel
				v	Reset
				Resets monitor to the original
				factory settings.
		Accessibility		Controls button and menu
				settings for accessibility
				preferences.
						Button repeat rate:
				Select			or	to change.
				v	Off
				v	Default
				v	Slow
						Menu time out: Sets the
				length of time the OSD will
				remain active after the last time a
				button is pressed.

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.

Unlike cathode - raytube (CRT) monitors, which require a high refresh rate to minimize flicker, liquid crystal display (LCD) or Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to re-attach the CRT monitor temporarily until you have re-configured the system; preferably to 1440 x 900 @ 60 H z, which is the Native Resolution Display (NRD) mode.

Chapter 2. Adjusting and using your monitor 2-5