Adjusting your monitor image
This section describes the user control features for adjusting your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Note: The direct access controls are grey.
Table 2-1. Direct access controls
Icon
Control | Description |
Input Change | Switches the video input source. |
Image Setup
Activates automatic image adjustment.
Brightness
Direct access to Brightness adjustment.
Using the On-Screen Display (OSD) controls
To adiust the settings, the user controls can be viewed through the OSD.
To use the controls:
1.Press 
to open the main OSD menu.
2.Use 
or 
to move among the icons. Select an icon and press 
to access that function. If there is a 
or 
,
then press 
to select that function. Use 
or 
to make adjustments. Press 
to save.
3. Press | to move backwards through the |
4.Press and hold 
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold 
for 10 seconds to unlock the OSD and allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the 
buttons for 10 seconds to disable / enable DDC/CI function. The words " DDC/CI disable" shows on the screen.
Chapter 2.