Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft® Windows

XP® Microsoft Windows Vista. Please see the Install Driver section of the Reference and Driver CD for automatic installation.

Installing the monitor driver in Windows Vista

To use the Plug and Play feature Microsoft Windows Vista, do the following:

Note: You must download file from the Lenovo Monitor CD to use the Plug and Play feature in Windows Vista.

1.Turn off the computer and all attached devices.

2.Ensure that the monitor is connected correctly.

3.Turn on the monitor and then the system unit. Allow your computer to start the Windows Vista operating system.

4.Open the Display Properties window by clicking Start, Control Panel and then double-clicking the Hardware and Sound icon.

5.Click the Personalization icon.

6.Click the Display Settings icon.

7.Click the Advanced Settings button.

8.Click the Monitor tab.

9.Click the Properties button.

10.Click the Driver tab.

11.Open the "Update Driver Software-Generic PnP Monitor" window by clicking on Update Driver and then click the "Browse my computer for driver software" button.

12.Select "Let me pick from a list of device drivers on my computer".

13.Click the Have Disk button. Click on the Browse button and navigate to the following directory:

X:\Monitor Drivers\Windows Vista

(where X is the drive letter designator for the CD-ROM drive).

14.Select the "L195 Wide.inf" file and click theOpen button. Click theOK button.

15.Select L195 Wide and click Next. The files will be copied from the CD to yourhard disk drive.

16.Close all open windows and remove the CD.

17.Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1440 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Chapter 3. 3-5