Sanyo PLC-XE32, PLC-XU75A, PLC-XL45, PLC-XW65 technical specifications Optional Accessories Glossary

Optional Accessories Glossary

SST-Bracket-WH		ST-Boom-WH		SANYOBOSS1
	Wall bracket for projectors		Weight: 10kg		Universal Ball joint
	PLC-XL50 and PLC-XL51		Colour: White		for 360 degree swivel
	Mount system with a flexible		Optional Active Speakers		30 degree tilt
	fastening rail for 60–80 inch		(Active Speakers-WH)		Fits 50mm ceiling poles
	image sizes		Zoom: 1000mm		11mm wide security cable
	Horizontal position can easily				Dimensions: 410 x 270 x 3mm
	be changed by up to 25 cm				Weight 2.5kg
	3 regulating screws for easy
	adjustment of the vertical position
	Colour: white
	Dimensions (W x H x D):
	250 x 680 x 320 mm
	Weight: 9 kg

POA-PN03C

PJ Net Organiser Plus Network manager Real-time data transfer Mobile camera as a control function

Projector status control and function control Network standard (LAN): IEEE802.3 (10BASE-T) / EEE802.3u (100BASE-TX) Suitable for: PLC-XT21, PLC-XT35L, PLC-ET30L, PLC-XP100L, PLC-XP200L, PLC-XTC50L

360° installation The projector can be installed with its own axis, allowing distortion-free projections at all levels. This is particularly suitable for situations where flexibility is required, for example in the case of digital signage and events.

3LCD The light emitted from the lamp is separated into the three basic colours of red, green and blue. Each of these colours is passed through its own LCD panel. The light and image information is then recombined using a dichroic prism to give realistic colour and shape to the projected image. The light yield from 3LCD is always optimal, because the projector is constantly projecting all three primary colours onto the screen.

Auto Lamp Selection System (ALSS) Projectors with an integrated lamp change function guarantee a high level of operating safety, because a replacement lamp is integrated in the unit. The replacement is used automatically if necessary, so that a presentation can be continued. This greatly reduces the maintenance frequency for a projector.

Automatic air filter replacement To ensure optimal cooling inside the projector, the air filter must be cleaned or replaced regularly. The integrated filter cartridge automatically changes the filter once the built in sensor signals that a replacement is necessary. A cartridge containing 10 filters allows maintenance-free continuous operation up to 30,000 hours depending on the device.

Connector socket Different connector sockets are available for the different signal types:

Signal type	Connector socket
D-Sub15	VGA
RCA	Composite, Component
DVI/HDMI	Digital signals
BNC	RGB, Video, S-Video
Mini Din 4	S-Video
Mini Din 8	Service input (RS232 control)

Contrast ratio This is the ratio between the maximum (white) and minimum (black) luminance that can be displayed by a projector. The higher the ratio, the better, i.e. the image displays black more effectively.

POA-PN40

POA-CW01POA-RCKIT04

POA-HDTM01

ANSI lumens Image brightness from a projector is measured in ANSI lumens. The brighter a projector, the wider its range of possible uses in terms of ambient light and screen size. In accordance with specific regulations, 9 areas on screen are measured in the image projected on-screen. The average of

Automatic lens cover Most home cinema projectors have an integrated lens cover to protect the lens from dust. When the projector shuts down or enters standby mode, the lens cover closes automatically.

Digital zoom The digital zoom function allows the user to select and enlarge a section of the presentation.

Direct Power On/Off These functions let you switch the projector on and off without delay. Direct Power On: The projector powers up the

PJ Net Organiser Network manager Projector status control and function control Network standard (LAN): IEEE802.3 (10BASE-T)/ IEEE802.3u (100BASE-TX) Data transfer speed (LAN): 10 Mbps/100 Mbps

(half duplex/full duplex)

LAN interface: 8 modular (RJ45)

Suitable for: PLV-80L

6-segment colour wheel Large colour space for higher colour and image quality Includes cyan, yellow

and magenta in addition to the primary colours red, green and blue

Suitable for: PDG-DXT10L, PDG-DWT50L

Remote control presentation Mouse function

Power supply: 2 batteries, type AAA or LR03 (supplied) Operating range: 5 m or +/–30° Dimensions (W x H x D):

51.5x 23.2 x 123.0 mm Suitable for: PLC-XL50, PLC-XW57, PLC-XW60, PLC-XW65, PLC-XU75A, PLC-XU78, PLC-XU105

HD wireless transmitter for wireless data transfer Only compatible in combination with the optional interface board POA-MD26HDWL

Maximum range: 30 meter

Data transfer rate: max. 1.5 GB/s Dimensions (W x H x D):

270 x 50 x 220 mm Weight: 1.3 kg

Suitable for PLC-XF47, PLC-XF71, PLV-WF20, PDG-DHT100L

the focus points multiplied by the image surface gives the lumen reading (Lumen = Lux x m2).

Audio function Many SANYO projectors have integrated speakers that can reproduce audio signals, i.e. sound. The powerful 7 watt speakers are an innovation in this area. These are integrated into the multimedia projectors belonging to the XC series. They are particularly suitable for use in training and conference rooms.

Automatic setup The automatic setup allows the projector to promptly register the connected device. Using the signal detection, keystone correction and auto PC adjustment, the projector adapts to the properties of the connected device and ensures that the presentation is ready to start in a matter of seconds.

moment it is plugged in. This is very convenient and it provides the user with great flexibility. Direct Power Off: With this function, the projector can be unplugged while it is in operation. This lets you transport it quickly without having to wait for it to cool down and without damaging the lamp.

20 21