Sanyo PLV-70 owner manual Selecting Video System, PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N

Page 32

VIDEO INPUT

SELECTING VIDEO SYSTEM

1	Press MENU button and ON-SCREEN MENU will appear. Press
1	POINT LEFT/RIGHT buttons to move a red frame pointer to AV
	SYSTEM Menu icon.
2	Press POINT DOWN button to move a red arrow pointer to
2	system that you want to select and then press SELECT button.

VIDEO JACK OR S-VIDEO JACK

Auto

Projector automatically detects incoming Video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually first.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates system being selected.

Move pointer to system and press SELECT button.

Y, Pb/Cb, Pr/Cr JACKS

Auto

Projector automatically detects incoming Video signal, and adjusts itself to optimize its performance.

When Video System is 1035i or 1080i, select system manually first.

COMPONENT VIDEO SIGNAL FORMAT

If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates system being selected.

Move pointer to system and press SELECT button.

32

Image 32

Contents Multimedia Projector To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Compact DesignAdjustable Feet Feet Lock Latches PreparationName of Each Part of Projector Carrying HandleFor Continental Europe For the U.K SETTING-UP ProjectorConnecting AC Power Cord Preparation Positioning Projector Room LightPreparation Adjustable Feet Moving ProjectorConnecting Projector Terminals of ProjectorTerminals A Projector Connecting to ComputerConnecting Projector Connecting to Video Equipment Audio VideoBefore Operation Operation of Remote ControlPoint Volume + Buttons Select Button Wired Remote Jack Keystone ButtonZoom Button No Show ButtonTOP Controls and Indicators Flow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Before Operation Menu BAR Turning OFF Projector Turning on / OFF ProjectorTurning on Projector Adjusting Screen Basic OperationSound Adjustment Basic Operation Picture Freeze FunctionNo Show Function Direct OperationComputer Input Selecting Input SourceSelecting Computer System InputPC Adjustment Auto PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Computer Input Display areaDisplay area H Full screenComputer Input Compatible Computer Specifications Resolution640 x 31.469 59.940 1024 x 48.363 60.004Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuVideo Input Picture Screen Adjustment Picture Screen Select DirectPicture Screen Select Menu Screen MenuVideo Input VideoComponent Video Signal Format Selecting Video SystemPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N AV System Menu Video or S-VIDEOCinema Tint Video Input Image Level AdjustmentColor Progressive scan SharpnessNoise reduction Zoom Wide zoomSetting Menu SettingSetting Menu To change code of Remote Control Unit To change code of ProjectorMaintenance AIR Filter Care and CleaningCleaning Projection Lens AppendixOrder Replacement Lamp Appendix Lamp ReplaceLamp Handling Precautions Appendix Lamp Replace CounterTroubleshooting Does not work ServiceRemote Control Unit Technical Specifications Appendix Configurations of Terminals Computer INPUT-1 Terminal AnalogPage Page Part No 298 6891 1AA6P1P3226-- M4LA

Related manuals

Manual 8 pages 62.2 Kb