Sanyo PLC-XL45 AUTO PC button, D.ZOOM buttons, NO SHOW button, KEYSTONE button, IMAGE button

Basic Operation

AUTO PC button

Press the AUTO PC button to operate the Auto PC function. See page 27 for more details.

D.ZOOM buttons

Press the D.ZOOM buttons to zoom in and zoom out the images. See page 33 for more details.

NO SHOW button

Press the NO SHOW button to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as “User” in the Logo selection (p.42), the screen changes each time you press the NO SHOW button as follows.

black out ➜ the captured image ➜ normal ➜ • • • • •

KEYSTONE button

For details, see page 22.

IMAGE button

Press the IMAGE button to select an image level of the screen. See pages 30, 37 for more details.

P-TIMER button

Press the P-TIMER button. The timer display “00:00” appears on the screen and the timer starts to count time (00:00–59:59).

To stop the P-Timer, press the P-TIMER button. Press the P‑TIMER button again, then the P-timer display disappears.

LAMP CONTROL button

Press the LAMP CONTROL button to select the lamp mode to change the brightness of the screen.

Normal … Normal brightness

Auto …… Brightness according with the input signal

Eco …… Lower brightness reduces the lamp power

consumption and extends the lamp life.

Remote Control

VOLUME +/-	KEYSTONE button
	(See page 22.)
buttons	POINT ed
(See page 23.)
	buttons
AUTO PC
button
D.ZOOM	IMAGE button
	P-TIMER button
buttons
NO SHOW
button	LAMP CONTROL
	button

✔Note:

•See the previous page for the description of other buttons.

“No show” disappears after 4 seconds.

P-Timer display

24