Sanyo PLC-XW50, PLC-XW55 owner manual Cleaning the Air Filters, Slide Shutter

Page 52

Maintenance and Cleaning

Cleaning the Air Filters

Air filters prevent dust from accumulating on the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat build up and adversely affect the life of the projector. Clean the air filters following the steps below.

1

Turn off the projector, and disconnect the AC power

2

cord from the AC outlet.

Turn over the projector and remove the air filters by

3

pulling the latches upward.

Clean the air filters with a brush or rinse them

4

softly.

When cleaning the air filters by rinsing, dry them

 

well. Replace the air filters properly. Make sure

 

that the air filters are fully inserted.

CAUTION

Do not operate the projector with the air filters removed. Dust may accumulate on the optical elements degrading picture quality.

Do not put small parts into the air intake vents. It may result in malfunction of the projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating the projector. Usage in these environments may cause a poor image quality.

When using the projector under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector. This condition may degrade the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.

Air filters

Pull up and remove.

Note:

Be sure to reinsert the air filters in the proper direction.

Slide Shutter

Slide Shutter Lever

Slide Shutter is provided to protect the surface of the lens against scratches and dirt. When you are not using the projector, close the Slide Shutter.

To open or close, use the Slide Shutter Lever on the top of the cabinet.

Do not close the shutter when the projection lamp is lighting.

Slide Shutter

52

Image 52
Contents Model PLC-XW50 PLC-XW55 Features and Design Table of Contents To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticePart Names and Functions Front Back BottomRear Terminal Top Control Remote Control Remote Control Battery Installation Operating RangeAdjustable Foot InstallationPositioning the Projector Connecting the AC Power Cord Projector sideInstallation Connecting to a ComputerCables used for connection Connecting to Video Equipment Connecting to Component Video Equipment Selected Input Source and Lamp Mode Basic OperationTurning On the Projector PIN Code Input Dialog BoxTurning Off the Projector Basic OperationHow to Operate the On-Screen Menu Remote ControlTop Control On-Screen MenuMenu Bar Zoom Adjustment Screen Position AdjustmentFocus Adjustment Keystone CorrectionSound Adjustment Remote Control OperationTimer button Auto PC buttonZoom buttons Keystone buttonComputer Input Input Source SelectionDirect Operation Source Select MenuComputer System Selection To store adjustment parameters Auto PC AdjustmentMenu Operation Auto PC Adj Manual PC Adjustment Reset Mode freeTo clear adjusted data To store adjusted dataImage Level Selection Image Level Adjustment Screen Size Adjustment NormalTrue WideDigital zoom + For zooming in and out the imagesDigital zoom Video Input Input Source Selection VideoDirect Operation Top Control Input Source Selection S-Video, Component, RGB Scart 21-pinVideo Input Video System Selection AutoAV System Menu Video or S-Video AV System Menu ComponentCinema Image 1~4Color TintNoise reduction ProgressiveProvide the image at a normal video aspect ratio Setting SettingDisplay Logo Logo and Logo PIN code lock settingsLogo select Capture Capture SettingLogo PIN code lock To Enter the Logo PIN code Rear CeilingInput search Power management On start Remote control Setting On startKey lock Security Key lock and PIN code lock settingsPIN code lock Change the PIN code lock setting Change the PIN codeFan Factory defaultLamp counter Top Control Maintenance & Cleaning Maintenance and CleaningThen check the matters below Cleaning the Air Filters Slide ShutterCleaning the Projection Lens Cleaning the Projector CabinetLamp Replacement Reset the lamp replacement counterLamp Handling Precautions Lamp Replacement CounterTroubleshooting AppendixAppendix Menu Tree SoundAutoSetting AppendixIndicators and Projector Condition IndicatorsCompatible Computer Specifications ResolutionTechnical Specifications Mechanical InformationOptional Parts Configurations of Terminals Service Port Connector Terminal Mini DIN 8-PINLogo PIN Code Lock No PIN Code Number MemoPart No LG6P1P0161-- KR6AC

PLC-XW55, PLC-XW50 specifications

The Sanyo PLC-XW50 and PLC-XW55 are sophisticated projectors that showcase cutting-edge technologies designed to enhance both professional and educational presentations. With their compact design and impressive specifications, these models are excellent choices for users seeking reliability and high-quality visuals.

Both projectors feature a resolution of XGA (1024 x 768) which ensures clear and detailed images, making them suitable for a variety of applications from business meetings to classroom settings. They utilize Sanyo’s advanced LCD technology, known for its vibrant color reproduction and excellent brightness. The PLC-XW50 offers a brightness of 4000 lumens, while the PLC-XW55 takes it a step further with an impressive 4500 lumens. This increased brightness makes the PLC-XW55 particularly suitable for larger venues or environments with higher ambient light.

In terms of contrast ratio, both projectors offer a commendable 2000:1, facilitating deeper blacks and brighter whites, which enrich the overall viewing experience. The projectors come equipped with a sealed optical block, a feature designed to minimize dust and ensure longevity of the internal components, thus reducing maintenance needs.

Connectivity is another strong aspect of the Sanyo PLC-XW50 and PLC-XW55. Both models include multiple input options including HDMI, VGA, and component inputs, allowing for seamless compatibility with a wide range of devices, from laptops to Blu-ray players. They also support a digital projector controller, making remote operation user-friendly and efficient.

Moreover, the projectors support various aspect ratios, including 4:3 and 16:9, enabling users to switch between different formats according to their content needs. The integration of 3D technology in the PLC-XW55 model further enhances its value, allowing users to present 3D content for a more immersive experience.

Finally, portable and lightweight, the Sanyo PLC-XW50 and PLC-XW55 projectors are designed for easy transportation. They also feature low noise operation, contributing to distraction-free presentations. With their stellar performance and user-focused features, the PLC-XW50 and PLC-XW55 are excellent choices for those seeking versatile and high-quality projection solutions.