Precaution, Cleaning | Sanyo VMC-8620 guide

PRECAUTION

If an abnormality does occur, turn the power switch off and unplug the unit. Have a qualified technician perform any repairs.

Do not use the monitor if it makes a strange noise, emits a strange odor, or if smoke comes out from it

If used under these conditions, the monitor may cause a fire or electric shock. Immediately unplug it and wait to make sure no more smoke comes from it. Then take it to the dealer for service. Do not try to repair or open the monitor yourself.

Do not allow the power cord to get damaged

•Do not place heavy objects on the power cord.

•Do not place the power cord near a heat source.

•Do not excessively bend the power cord, modify it, or secure it with staples.

Doing so may damage the power cord and cause a fire or electric shock.

If the power cord is damaged, take it to the dealer and have it replaced.

Do not allow dust or dirt to build up on the power cord or power outlet

A build-up of dust may cause a short circuit or generate heat and cause a fire.

Be especially careful when using the monitor in areas of high humidity, in areas with frequent condensation, in kitchens, and in places where there is excessive dust.

Periodically unplug the power cord and clean away the dust that builds up between the plug terminals.

Cautions when plugging in the power cord

•Make sure you insert the plug of the power cord all the way in the power outlet. Using the monitor with the power cord not fully plugged in may cause heat to generate and cause a fire.

•Do not use the monitor with the power cord wound or tied up. Heat may generate and cause a fire.

•When using an extension cord, be sure that the total current load of all equipment connected to it dose not exceed the specified ratings of the extension cord. If the rating are exceeded, heat may generate and cause a fire. Make sure to carefully read the specifications accompanying the extension cord.

Cleaning

•Dirt can be removed from the cabinet by wiping it with a soft cloth. To remove stains, wipe with a soft cloth moistened with a soft detergent solution and wrung dry, then wipe dry with dry soft cloth.

•Do not use benzine, thinner or other chemical product on the cabinet, as that may cause deformation and paint peeling. Before using a chemical cloth, make sure to read all accompanying instructions. Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time, as that may cause damage or paint peeling.

SERVICE

This unit is a precision instruments and if treated with care, will provide years of satisfactory performance. However, in the event of a problem, the owner is advised not to attempt to make repairs or open the cabinet. Servicing should always be referred to your dealer or Sanyo Authorized Service Centre.

VMC-8620 specifications

The Sanyo VMC-8620 is a remarkable piece of equipment known for its precision and efficiency in the realm of machining and manufacturing. This model offers a versatile platform for various applications, making it a preferred choice among engineers and manufacturers alike.

One of the standout features of the VMC-8620 is its robust build. Constructed with a solid cast iron frame, the machine provides enhanced stability and reduced vibration during operation. This stability is further complemented by its ergonomic design, ensuring that operators can work comfortably over extended periods.

The VMC-8620 boasts a powerful spindle motor that delivers impressive speed and torque. With a maximum spindle speed typically reaching up to 10,000 RPM, the machine is well-suited for precision tasks such as milling, boring, and drilling. This high-speed capability allows for more aggressive machining strategies, reducing cycle times and increasing productivity.

Equipped with advanced CNC (Computer Numerical Control) technology, the VMC-8620 allows for exceptional control over the machining process. The intuitive interface, often accompanied by a user-friendly touchscreen, enables operators to program complex geometries and intricate designs effortlessly. This level of automation minimizes human error and enhances the overall quality of the output.

The machine features a generous work envelope, providing ample space for larger workpieces. This flexibility is further enhanced by its tooling capabilities, which often include an automatic tool changer (ATC). The ATC allows the machine to switch between different tooling quickly, making it ideal for jobs requiring multiple operations without significant downtime.

Additionally, the Sanyo VMC-8620 is designed with efficiency in mind. It often includes workpiece cooling systems, chip conveyor options, and energy-efficient components that contribute to lower overall operating costs. The machine also typically incorporates advanced safety features, ensuring operator protection while maintaining high productivity levels.

Overall, the Sanyo VMC-8620 stands out in the market for its blend of speed, precision, and user-friendly technology. Whether for high-volume production or customized manufacturing tasks, this machine is engineered to meet the demands of modern machining industries. Its reputation for reliability and performance continues to make it a popular choice among manufacturers looking to enhance their operational capabilities.