Sanyo CE52LH1R instruction manual Menu Operation, Sound menu, Time menu, Setup menu

GB MENU OPERATION

GB

Picture menu

■Advanced settings

Use the 5or 6button to select Advanced settings and press the 1￿or 2 button to enter the sub menu as follows.

DCDi(Directional Correlational Deinterlacing) is used to process moving angled edge in deinterlacing to get the smoothest and most natural image. Press the 1￿or 2 button on the remote control to select On or Off.

ACC/ACM(ACC: Adaptive Contrast and Color; ACM-II: Active Color Management-II) is used to select adaptive Brightness, Contrast and tone control. Press the 1￿or 2 button on the remote control to select suitable mode either Vivid, Cinema, Sport or Off.

CCS(Cross Color Separation) is used to remove residual chroma information from luminance signal which is the result of imperfect decoding of composite video. Press the 1￿or 2 button on the remote control to select either Auto, Standard or Off.

DNR(Digital Noise Reduction) is available for noise reduction. Press the 1￿or 2 button on the remote control to select either Auto, Low, Mid, High or Off.

MPEG NR(MPEG Noise Reduction): Removes unwanted ringing and block noise from images that have undergone MPEG or JPEG compression and decompression. Press the 1￿or 2 button on the remote control to select On or Off.

Film Mode(Inverse 3:2 pulldown): Film vs.Video-Detect film. Performed on material which underwent technologic conversion to video. Press the 1￿or 2 button on the remote control to select On or Off.

Sound menu

Press the MENU button and select Sound using the 5or 6 buttons, press the 1￿or 2 button to enter.

Select and adjust to obtain the best sound settings for your environment using the 5or 6button to select Treble, Bass or Balance and the 1￿or 2 button to adjust levels.

Bass Expander can also be selected using the 5or 6button and pressing the 1￿or 2 button to select On or Off.

These settings automatically store when you exit the menu. Press the BACK button to return to the previous menu. Press the MENU button to exit menu operation.

Time menu

Press the MENU button and select Time using the 5or 6 buttons, press the 1￿or 2 button to enter. Press the BACK button to return to the previous menu. Press the MENU button to exit menu operation.

✐If the monitor is switched off by the standby switch 4 on the back of the LCD monitor the time settings will be cancelled.

■Current Time

Use NUMERIC buttons [0-9] to set Current time. (00:00~23:59) To✐ reset the time using the 1￿or 2 button.

Other items in Time Menu cannot be selected until Current Time has been set.

■Off Time

The Off time will switch the monitor into the standby mode when the selected time has elapsed.

Use NUMERIC buttons [0-9] to set Off Time. (00:00~23:59) To reset the time using the 1￿or 2 button.

✐ If the monitor is switched off by the standby button 4, the timer ✐ settings will be cancelled.

About one minute before the set time is reached, the status of the monitor will display on the screen.

■On Time

Once On Time has been set, you will not miss your favourite tv programme.

Use NUMERIC buttons [0-9] to set On Time. (00:00~23:59) To✐ reset the time using the 1￿or 2 button.

Once On Time has been set, when the set time is reached, the monitor will leave the stand-by status and enter to the source

✐automatically.

After On Time has been set, you can go on watching other programs. When the set time is reached, the monitor will display "Note: Time is up!" and then will automatically switch to

the preset program.

■ On Position

✐ On Position can only be selected whenOnTime has been set.

Once On Position has been set, when the set time is reached, the monitor will enter to the preset source automatically.

Use the 1￿or 2 button to select the preset source AV1, AV2, AV3, PC orDVI.

Setup menu

Press the MENU button and select Setup using the 5or 6 buttons, press the 1￿or 2 button to enter. Press the BACK button to return to the previous menu. Press the MENU button to exit menu operation.

6I\Q^M:M[WT]\QWV @/)

■Menu Setup

Whenever Setup menu is accessed initially, Menu Setup will be the default selection. Press the 1￿or 2 button to enter the sub menu.

Language is preset to English.

H-Positionchanges the OSD position horizontally by using the 1

or 2 button.

V-Positionchanges the OSD position vertically by using the 1￿or

2button.

Duration is used to set the display time of the MENU by using the 1￿or 2 button.(5~120 seconds)

Transparence is used to adjust transparence of menu. Use the 1 or 2 button to adjust levels.

8