|
|
|
|
|
| O |
|
|
|
|
| SH | |
|
|
|
| LE |
| |
|
|
| B |
|
| |
|
| U |
|
|
| |
| O |
|
|
|
| |
R |
|
|
|
|
| |
T |
|
|
|
|
|
|
OTI
N
G
Troubleshooting
Problem | Possible Reason | Solution |
Screen displays with | Volume is turned down. | Adjust the volume control. |
no sound | Headphones are | Unplug headphones from |
| connected. | headphone jack. |
Screen turns on, then | Battery power low | Replace the battery. |
immediately off |
|
|
No picture (or | Program needs to be | Disconnect all power supplies |
incorrect picture) on | reset | (batteries and adaptor), then |
screen, and pressing |
| reconnect all power supplies. |
the Power button has |
| Press the Power button. |
no effect. |
|
|
| Remove the cartridge, clean it if | |
|
| |
|
| necessary, and then |
|
| into the InnoTab® 2. |
No screen display | Battery power low | Replace the battery. |
after pressing Power |
|
|
Incomplete battery | Make sure to install all batteries | |
button | installation | in the battery compartment. |
| ||
|
|
|
| No AC adaptor power | Securely connect the AC |
|
| adaptor or car adaptor to both |
|
| the InnoTab® 2 and the power |
|
| source. |
The cartridge icon | Poor cartridge | Remove the cartridge, clean it if |
does not appear on | connection | necessary, and then |
desktop |
| into the InnoTab® 2. |
USB connection | Poor USB cable | Securely connect the USB cable |
window does | connection | to InnoTab® 2 and the computer. |
not pop up after |
|
|
connecting to | Connection is running | Connect the InnoTab® 2 directly |
computer | through USB hub | to the computer, without using |
|
| a hub. |
24