Wall-Mounting the Satellites and Center Channel

Wall-Mounting the Satellites and Center Channel

The CS360 satellites and center channel are designed to be mounted on the wall. There is a fixed-mount wall bracket and an adjustable wall bracket provided for each satellite and the center channel. Each speaker bracket will require up to four 38 mm (1-1/2") #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 38 mm (1-1/2") #10 screw.

NOTE: The customer is responsible for the correct selec- tion and use of mounting hardware (available through hardware stores) that will ensure the proper and safe wall-mounting of the speakers.

Fixed-Mount Wall Bracket

Step 1. Mark the positions on the wall where you would like to place the mounting screws.

Step 2. Attach the bracket to the wall using two screws (not included).

Step 3. Remove the rubber ring on the bottom of the satellite and hold the satellite or center channel speak- er in the right position on the bracket.

Step 4. Attach the short Phillips screw into insert on bottom of speaker and tighten.

Step 5. Attach speaker wire as shown on page 7.

NOTE: The fixed-mount wall bracket for the center speaker is the one with the wide support plate. The center speaker has to be mounted horizontally when using the fixed-mount bracket. See image on page 4. In order to attach this bracket, first detach the stand and remote sensor that are fixed to the center speaker from the factory. Simply loosen and remove the large Phillips screw at the bottom of the stand. The remote sensor and the stand come off as two separate items, and you may now position the remote sensor freely, if you decide to use it. The bracket should be attached to the wall first, then the cables should be connected to the speaker, and finally you can attach the speaker to the bracket with the large Phillips screw from beneath.

Adjustable Wall Bracket

Step 1. Remove cap over threaded insert on rear of speaker.

Step 2. Mark the positions on the wall where you would like to place the mounting screws.

Step 3. Place bracket against the wall and fasten four 38 mm (1-1/2") #10 wood screws through the bracket’s screw holes into the wall. If a wall stud is not available, use an appropriate anchor.

Step 4. Unscrew round collar (C) from bracket (A).

Step 5. Screw the ball and shaft assembly (B) to the short Phillips screw insert on the back of the satellite or the center channel (do not use the bottom insert on either speaker). Back out 1/2 of a turn and tighten the nut against the speaker. If the ball and shaft assembly is not backed out before tightening the nut, perform- ing Step 8 below may dislodge the threaded insert

in the speaker housing and permanently damage the speaker.

Step 6. Attach speaker wire as shown on page 7.

Step 7. Drop round collar (C) over ball and shaft assem- bly (B) that is mounted to the speaker with the finished side of the collar facing the rear of the speaker.

Step 8. Carefully push the ball straight into the socket mounted on the wall, angle the speaker as desired and tighten the collar using the enclosed metal bar.

Metal bar

Figure 3. Bracket on wall

Before mounting the center speaker on an adjustable wall bracket, remove the base and remote sensor assembly as described under “Fixed-Mount Wall Bracket” above.

CS 360 Xcite specifications

The JBL CS 360 Xcite is at the forefront of audio technology, designed for audiophiles and casual listeners alike who demand exceptional sound quality. Renowned for its innovative features, the CS 360 Xcite delivers a captivating listening experience that caters to diverse auditory preferences.

One of its standout features is the integration of advanced audio technologies, including JBL’s proprietary Inverted Dome Tweeter. This technology enhances high-frequency performance, delivering clear and crisp audio across the spectrum, ensuring that every note, from the soothing highs to the robust lows, is reproduced with precision. The speaker's frequency response ranges from deep bass to sparkling treble, making it suitable for everything from classical symphonies to modern rock.

The CS 360 Xcite also includes a rugged, lightweight design that ensures portability without sacrificing sound quality. Its durable construction not only enhances durability but contributes to the speaker's ability to produce powerful sound in various environments. This makes it an excellent choice for outdoor gatherings, parties, or home use.

Another striking feature of the CS 360 Xcite is its adaptive connectivity options. Equipped with Bluetooth technology, it allows for seamless pairing with smartphones, tablets, and other devices. This wireless capability means users can enjoy their favorite playlists without the hassle of tangled cords, offering convenience alongside performance. Additionally, the speaker supports multiple input options, including AUX and USB, catering to a variety of media devices.

Furthermore, the CS 360 Xcite comes with a built-in battery offering extended playback time, making it suitable for long outings or events. The intuitive control interface simplifies navigation, allowing users to adjust volume, skip tracks, and switch between modes with ease.

In terms of aesthetics, the JBL CS 360 Xcite boasts a sleek and modern design that fits well in any setting. Its stylish exterior is complemented by customizable LED lighting, allowing users to set the mood for any occasion.

Overall, the JBL CS 360 Xcite stands out as a versatile speaker that blends cutting-edge technology with user-friendly features. Whether at home, at a gathering, or on the go, it promises an unparalleled audio experience characterized by clarity, power, and convenience. With its combination of advanced technologies and thoughtful design, the JBL CS 360 Xcite is ideal for anyone looking to elevate their listening experience to new heights.