Projector Monitoring & Diagnostics

Connect PJ Man to Hitachi Projectors that have an embedded RJ-45 Ethernet LAN Port.

Current Hitachi Projectors with embedded Ethernet ports include: CP-X443, CP-X445, CP-X1200, CP-X1250

and CP-SX1350.

Please check www.hitachi.us/digitalmedia for updated listing of projector models with embedded RJ-45 Ethernet LAN Ports.

Supported Projectors

Hitachi PJ Man currently supports the following Hitachi Projectors: CP-RS55, CP-RX60, CP-S210, CP-S235, CP-S318, CP-S335, CP-SX1350, CP-SX5600, CP-X328, CP-X340, CP-X345, CP-X440, CP-X430, CP-X443, CP-X444, CP-X445, CP-X880, CP-X885, CP-X995, CP-X1200, CP-X1230, CP-X1250, CP-SX1350, ED-S3170, ED-S3350, ED-X3270, ED-X3280, ED-X3400, ED-X3450, PJ-LC7

Connect PJ Man to Hitachi Projectors using an external Networking Module* (Ethernet to Serial).

Connect PJ Man to Hitachi Projectors using an RS-232C Serial Cable (cross cable)

Hitachi external Projector Networking Module part numbers

•HIT-UDS-10-01: 10Base-T module and cable adapter

•HIT-UDS-100-01: 10Base-T/100Base- TX module and cable adapter

•HIT-WB2100-01: Wireless module (802.11 to Serial)

•HIT-KJ-200: 802.11 b/g Wireless Projector Networking and Presentation Module

We are continually updating PJ Man to support additional Hitachi Projector models Please check www.hitachi.us/digitalmedia for a current listing of supported projectors.

PJ Man Minimum System Requirements

•Operating System

Windows 2000 Professional SP3 or later version Windows XP Professional SP1or later version

•CPU

Pentium 500Mhz or higher

•Memory 256MB or higher

•Hard disk

Minimum 10MB free space for installation

•Local Area Network connection (RJ-45) or Serial port (RS-232C)

Microsoft and Windows is the registered trademark of Microsoft Corporation in the US and other countries Pentium is the registered trademark of Intel Corporation in the US and other countries

All other trademarks are the property of their respected owners