Hitachi CP-S370W user manual Operations, Power on, Power OFF, Equipment is used safely

Page 10

OPERATIONS

POWER Indicator

STANDBY/ON Button

STANDBY/

ON Button

STANDBY/ON

VIDEO RGB

KEYSTONE

MENU

SELECT

MENU POSITION RESET

ENGLISH

Zoom Knob

Focus Ring

Power Switch Lens Cap

MAGNIFY

FREEZE VOLUME

MUTE

OFF

AUTOBLANK

Power ON

1.Check that the power cord is connected correctly.

2.Set the power switch to [ ]. The standby mode is selected, and the POWER indicator is turned to orange.

3.Press the STANDBY/ON button on the control panel or the remote control transmitter. Warm-up begins and the POWER indicator blinks in green.

4.The POWER indicator ceases blinking and turns to green when power is on. Open the slide lens door.

5.Adjust picture size using the zoom knob.

6.Adjust focus using the focus ring .

Power OFF

1.Press the STANDBY/ON button on the control panel or the remote controller. Then,the message "Power off?" will appear on the screen, and the message will disappear by any operation

or no operation for 5 seconds. During this message indication, press the STANDBY/ON button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator

blinks orange during lamp cooling. Pressing the STANDBY/ON button has no effect while the POWER indicator is blinking.

2.The system assumes the Standby mode when cooling is complete, and the POWER indicator ceases blinking and changes to orange. Check that the indicator is orange and set the power switch to [O].

3.The POWER indicator is extinguished when power is off. Do not forget to close the lens door.

WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS” thoroughly before using the equipment. Always ensure that

the equipment is used safely.

NOTE • Except in emergencies, follow the above-mentioned procedure for turning power off. Incorrect procedure will reduce the life of the projector lamp and LCD panel.

•To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before the projector.

•When a projector continues projecting the same image, the image may remain as an afterimage. Please do not project the image same for a long time.

ENGLISH-9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CP-S370W Contents Contents of Package FeaturesBefore USE Before USE Part NamesButton Position Button Reset Button Menu Button Magnify ButtonVolume Button Freeze Button Auto Button Battery Holder Video Button RGB Button Menu Select ButtonFirst Loading Loading the BatteryFixing the Handle ReplacingAngle Adjustment InstallationInstallation of the Projector and Screen Installation ReferenceCabling InstallationCabling Example of system setup Power ConnectionPlug & Play Operations Power onPower OFF Equipment is used safelyBasic Operation OperationsBasic Operation Description Normal menu Single menu Set / Clear Keystone Mode Press the KeystoneAdjust Keystone Press Menu Display Start/Stop Press the Menu buttonSelect Image Aspect Ratio Setup MenuSetup Menu Select Position of ImageInput Menu Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuImage Menu Setup Initial Screen Display Select Turn on withSelect Color Temperature Image Menu DescriptionOptions Menu Description Set / Crear Whisper Mode PressOptions Menu Select Menu Background Color Select withNo Signal Menu No Signal Menu DescriptionLamp MaintenanceLamp Lamp LifeResetting the Lamp Timer MaintenanceReplacing the Lamp Other Maintenance Air FilterOSD Message TroubleshootingMessage Contents OSD MessagesIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Sub 15-pin Shrink Connector RGB in 1/RGB in 2/RGB OUT Dimension DiagramSignal Connector Pin Assignment Mini Din 4-pin Connector S-VIDEOExample of computer signal TechnicalInitial set signals USB Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse PS/2 MouseADB Mouse Serial MouseRS-232C communication Communications settingCommand data ProtocolUsing the projector default settings Reset Command Requesting projector status Get commandChanging the projector settings Set command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Be EF CB D0 FCC Statement Warning Regulatory NoticesFor the Customers in Canada Pour les utilisateurs au Canada Hitachi Business Systems Nordic Hitachi Europe GmbHHitachi Sales Europe GmbH Hitachi France
Related manuals
Manual 39 pages 36.68 Kb

CP-S370W specifications

The Hitachi CP-S370W is a versatile yet compact projector designed for various environments, including classrooms, office settings, and small conference rooms. This model is well-regarded for its impressive performance, user-friendly features, and advanced technology, making it a solid choice for educators and professionals alike.

One of the standout features of the CP-S370W is its brightness. With a remarkable brightness level of 3500 ANSI lumens, this projector delivers clear and vivid images even in well-lit environments. This high brightness ensures that visuals are easily visible, making it ideal for presentations where ambient light cannot be controlled.

The projector has a native resolution of 1280 x 800 pixels (WXGA), allowing for a wide-screen aspect ratio of 16:10. This makes it suitable for displaying HD content and detailed graphics without compromising quality. The CP-S370W also utilizes DLP technology, which provides exceptional color accuracy and contrast ratios, resulting in crisp and vibrant images that captivate audiences.

Another key characteristic of the CP-S370W is its ease of use. The projector is equipped with multiple connectivity options, including HDMI, VGA, and USB ports. This versatility allows users to connect various devices, such as laptops, tablets, and multimedia players, ensuring compatibility with a wide range of tools.

In terms of portability, the CP-S370W is lightweight and compact, making it easy to transport between locations. This feature is particularly useful for those who conduct presentations in different settings. The projector also comes with quick start and shutdown functions, enabling users to set up and pack away effortlessly.

The Hitachi CP-S370W emphasizes eco-friendliness with its energy-saving features. The long lamp life, rated at approximately 5000 hours in Eco mode, significantly reduces the need for frequent replacements and contributes to lower operating costs, making it an economical choice over time.

Additional features include a built-in speaker, automatic keystone correction, and a range of image adjustments, ensuring that users can optimize their viewing experience. Overall, the Hitachi CP-S370W stands out as a reliable, high-quality projector that meets the needs of modern presentations, combining robust technology with user-centric design.
Top Page Image Contents