Hitachi CP-X980W user manual Operations, Basic Operation Description

Page 11

OPERATIONS (continued)

Basic Operation

The basic operations shown in Table 3 is performed from the supplied remote control transmitter or the projector control panel. Items indicated by (*) may be used from the control panel.

Table 3 . Basic Operation

Item

 

Description

 

Select Input Signal (*) : Press the INPUT button.

 

RGB IN 1 RGB IN 2 DIGITAL

 

VIDEO S-VIDEO COMPONENT VIDEO (RGB IN 1)

 

Select RGB Input : Press the RGB button.

INPUT

VIDEO/S-VIDEO/COMPONENT VIDEO RGB IN 1/RGB IN 2/DIGITAL

RGB IN 1 RGB IN 2

DIGITAL (RGB IN 1)

SELECT

Select Video Input : Press the VIDEO button.

 

 

RGB IN 1/RGB IN 2/DIGITAL VIDEO/S-VIDEO/COMPONENT VIDEO

 

VIDEO S-VIDEO COMPONENT VIDEO (VIDEO)

 

• The selected signal name is displayed for approximately 3 seconds when the input

 

signal is changed.

 

Set/Clear Position Adjustment Mode : Press the POSITION button.

The [ ] icon is displayed in the POSITION mode.

 

Image Position Adjustment: Press the ,

, and

buttons in the

POSITION

POSITION mode.

 

 

 

• Valid only in the MAGNIFY mode with a video signal is input.

 

 

 

 

• After approximately 10 seconds of inactivity the [

] icon is extinguished and the

 

POSITION mode is cleared automatically.

 

 

 

• , , and

buttons may operate as the mouse control button. Refer to page 4.

Initialise Each Item : Select an item and press the RESET button.

Initialise Position Adjustment : Press the RESET button and the RESET (*) POSITION mode. This function is valid only when RGB signal is input.

Valid except for the VOLUME, LANGUAGE and H PHASE.

The RESET button may operate as the mouse control button. Refer to page 4.

Set MAGNIFY Mode : Press the MAGNIFY

button.

Move Magnified Area : Run the POSITION in the MAGNIFY mode.

Adjust Magnification : Press the MAGNIFY

/

 

button in MAGNIFY

 

MAGNIFY mode.

Clear MAGNIFY Mode : Press the MAGNIFY OFF button.

The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT SELECT or VIDEO, or by changing the input signal.

 

Set/Clear FREEZE Mode : Press the FREEZE button. The [II] icon is

 

displayed, and the image frozen, in the FREEZE mode.

FREEZE

• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,

Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the input

 

 

signal.

 

• Do not forget to clear frozen static images.

NOTE • Use the remote control transmitter at a distance of approximately 5m from the sensor on the front of the projector, and within a range of 30° left-right. Strong light and obstacles will interfere with operation of the remote control transmitter.

ENGLISH-10

Image 11
Contents CP-X980W/X985W Contents Before USE FeaturesContents of package Part Names Before USEENGLISH-4 Loading the Batteries Installation Reference InstallationInstallation of the Projector and Screen Angle AdjustmentCabling InstallationCabling Plug & Play Power ConnectionExample of system setup Standby Power onPower OFF OperationsBasic Operation Description OperationsBasic Operation Menu Display Start/Stop Press the Menu button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Setup Menu Setup MenuInput Menu Description Automatic Adjustment at RGB Input Select the Execute withAutomatic Adjustment at Video Input Select the Execute with Input MenuImage Menu Image MenuAuto OFF Options MenuOptions Menu Description LanguageNo Signal Menu No Signal MenuLamp Life MaintenanceLamp LampReplacing the Lamp MaintenanceResetting the Lamp Timer Cleaning the Lens Air Filter MaintenanceOther Maintenance Maintenance Inside the EquipmentOSD Messages TroubleshootingMessage Contents OSD MessageIndicator TroubleshootingIndicators Message Indicators MessageSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Technical Dimension DiagramSignal Connector Pin Assignment Resolution FH kHz FV Hz Rating Signal mode Display Example of computer signalTechnical Initial set signalsPS/2 Mouse Connection to the Mouse ControlPS/2, ADB or Serial Mouse USB MouseSerial Mouse ADB MouseProtocol Communications settingCommand data RS-232C communicationIncreasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Page Hitachi Business Systems Nordic Hitachi Sales Corp. of CanadaHitachi Europe GmbH Hitachi Sales Europe GmbH