Hitachi CP-WU8440, CP-WX8255, CP-WU8450, CP-SX8350, CP-X8150, CP-X8240 Selecting lamp operation mode

Page 16

STACK menu settings

3.3 Selecting lamp operation mode (continued)

NOTE • When DUAL is selected for LAMP MODE, the images projected from the Main and Sub projectors may be different. It is recommended to set the projectors as follows.

-Set the same image for TEMPLATE and START UP on the Main and Sub projectors.

-Capture the same image for MyScreen on the Main and Sub projectors.

-Save the same image on MY IMAGE on the Main and Sub projectors.

-Set the same message content for the Messenger function (Network Guide

→Messenger Function) on the Main and Sub projectors.

•When DUAL is selected for LAMP MODE, image shift can result in image quality degradation on the screen. Perform the INSTALLATION setting before adjusting the image position as the image position will change when the INSTALLATION setting is changed. (Operating Guide → SETUP menu)

•When ALTERNATE is selected and an error occur on the projector in operation causing the lamp to turn off, the other projector will automatically start to operate. However, if the RS-232C cable is disconnected or AC power is not supplied, the other projector will not turn on.

•In cases when PIN LOCK or TRANSITION DETECTOR on both projectors

is set to ON (Operating Guide → SECURITY menu), the two projectors will not turn on even if ALTERNATE is selected. Enter the security code on both projectors and one of the projectors will turn on.

•When Intellectual Stack is in use, the POWER indicator on the projector operates differently from normal. (Operating Guide → Troubleshooting) When both the Main and Sub projectors are in standby mode, the Main projector determines which projector to turn on according to the STACK MODE setting if the ON button on the remote control or STANDBY/ON button of the Main projector is pressed.

-The POWER indicator on the Main projector blinks in green while the Main projector determines which projector to turn on.

-If the Main projector is turned on, the POWER indicator on the Main projector turns to steady green after lighting up, as per normal.

-If the Sub projector is turned on, the POWER indicator on the Main projector lights in orange after the Sub projector is turned on.

-If an error occurs on the Main projector, the Sub projector turns on and the POWER indicator on the Main projector lights or blinks in red.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Features Instant Stack GuideContents Remote control for Intellectual Stack and Simple Stack IntroductionBasic information and preparations Instant StackIntroduction Installation Preparing for Intellectual StackDeciding installation position Installing the first projector Set aSetting up Set a Operating Guide → Option menu Connecting projectors Installing the second projector Set BSetting up Set B Installation Confirming Main and Sub settings Fine adjusting image position For Intellectual Stack usersFor Simple Stack users Stack menu settings Displaying Stack menuSelecting Main, Sub or off Selecting lamp operation mode Only for CP-X8160,CP-WX8255 and CP-WU8450Selecting lamp operation mode Selecting lamp switching mode Selecting input source for Sub Stack menu Exiting Intellectual Stack menuDialog from Stack menu Important information for Intellectual Stack USB Type A, USB Type B, LAN Only for CP-WU8440 and CP-WU8450Example Connecting cables Connecting an RS-232C cableInputting image from Main to Sub Connecting signal cablesInputting image to Sub and Main individually Preparing for menu operations Setting input ports using menuChecking Main projectors operating status Starting up Main projector Setting the menu Inputting image from Main to Sub Computer signalInputting image to Sub and Main individually Setting input ports using menu Restrictions on the Main projector Restrictions on Schedule functionRestrictions on the Sub projector Restrictions on Schedule function Troubleshooting No power is supplied to the Main and SubSignal cables are not connected correctly ProjectorSettings on the projectors are not set For the Intellectual Stack featureRemote control is pointed at the Sub There are some adjustment differences Two images
Related manuals
Manual 38 pages 39.11 Kb Manual 5 pages 1.77 Kb

CP-X8240, CP-X8160, CP-WU8450, CP-SX8350, CP-WX8255 specifications

The Hitachi CP-WX8240 and CP-X8150 projectors are two powerful solutions designed to meet the needs of a variety of settings, including education, corporate environments, and large venues. Both models offer advanced features, high-quality visuals, and user-friendly operation, making them ideal choices for presentations, lectures, and multimedia applications.

The Hitachi CP-WX8240 stands out with its WXGA resolution (1280 x 800), ensuring sharp and clear images. With a remarkable brightness of 8,500 lumens, it is capable of delivering vibrant visuals even in well-lit environments. The CP-WX8240 features a high contrast ratio, which enhances the clarity of the projected images, thereby making text legible and colors vivid. This model also incorporates advanced 3D technology, enabling users to deliver immersive visual experiences, perfect for educational and commercial purposes.

On the other hand, the Hitachi CP-X8150 offers XGA resolution (1024 x 768) with a brightness of 7,500 lumens. While it may have slightly lower specifications compared to the CP-WX8240, the CP-X8150 is still a highly effective projector designed for professional use. It features a 2000:1 contrast ratio, providing excellent detail in both bright and dark scenes. This projector is ideal for projecting detailed graphics and text in meeting rooms, classrooms, and auditoriums.

Both projectors utilize Hitachi's advanced image and color management technology, which ensures accurate color reproduction and image stabilization. This technology helps to enhance the overall viewing experience by producing consistent visuals regardless of the content being displayed. Moreover, they support multiple input options, including HDMI, VGA, and USB, offering connectivity flexibility for various devices.

In terms of maintenance and usability, both models are designed with user-friendly features, such as easy lamp replacement and filter access. They also come equipped with integrated speakers, eliminating the need for additional external sound systems in smaller venues. Furthermore, the projectors support wireless functionality, allowing for seamless connectivity to laptops and mobile devices for effortless presentations.

In summary, the Hitachi CP-WX8240 and CP-X8150 projectors are excellent choices for users seeking high brightness, impressive image quality, and versatile connectivity options. Their robust features and advanced technologies make them suitable for a diverse range of applications, delivering exceptional performance whether in a classroom or conference hall.
Top Page Image Contents