JBL P52OWS owner manual Planning Your System, Proper Placement and Setup, Placement Application

Page 2

PLANNING YOUR SYSTEM

Unpacking the Speaker

If you suspect damage from transit, report it immediately to your dealer. Keep the shipping carton and pack- ing materials for future use.

Proper Placement and Setup

The P52OWS surround speaker can be used in side or rear chan- nel applications. Please refer to the placement and setup method for your application. The first step is to determine the application for which your P52OWS surround speaker will be used.

If you are using the P52OWS for surround channels in a 5-channel home theater system or for side channels in a 6- or 7-channel home

If the side walls on which the speaker will be mounted are more than about 14' (4.3m) from the listening position, setting the Surround Mode Configuration Switch to Monopole may offer improved performance. It is also recommended that the Monopole position be selected if the speak- ers will be mounted close to a cor- ner, as shown in Figure 2.

If you are using a receiver/proces- sor with a THX® surround mode and have selected the THX sur- round mode, it may be beneficial to use the Dipole setting. This is a matter of personal preference and may change depending on the indi- vidual film soundtrack. It is also

IMPORTANT NOTE: The set of driv- ers closer to the monopole setting indicator in Figure 3 should be installed toward the front of the room. It does not matter whether the tweeter is positioned above or below the woofer. This will ensure proper operation and performance should the Monopole or Dipole position on the surround mode configuration switch be selected.

(BIPOLE)

Left

Center

Right

JBL

Front

Channel

Front

Subwoofer

Channel

 

Channel

(optional)

 

Couch

Left

Right

Side

Side

Channel

Channel

 

Rear Center Channel

Figure 4. This overhead view shows a typical home theater plan with a single rear-center surround channel.

Placement (Application 3)

The P52OWS also possesses the unique capacity to behave as two distinct loudspeakers from one enclosure. This allows you to use a single P52OWS for both the left and right rear speakers in a 7-channel system.

To use the P52OWS in Application 3, follow these simple steps:

1. Decide where you want to

mount the speaker. Ideally, it

should be mounted in the center

of the rear wall, similar to how

it would be mounted in a 6-

channel system (Fig. 4).

2. Loosen the terminals and

remove the strapping bars that

(BIPOLE)

(MONOPOLE)

(DIPOLE)

Figure 6. Surround mode configu- ration switch.

theater system (Application 1), please follow the directions below.

To use the P52OWS as a rear speaker in a 6- or 7-channel home theater system (Application 2), please follow the directions on page 3.

The P52OWS also possesses the unique capacity to behave as two

recommended that the Dipole setting be used with older record- ings that are only recorded with a Dolby® Pro Logic® (not the newer Dolby Digital) soundtrack.

Figures 1 and 2. These overhead views show typical home theater plans.

(MONOPOLE)

(DIPOLE)

Figure 3. Surround mode configu- ration switch.

Left Center

Front Channel

Channel

Couch

Left

Side

Channel

Left Rear Channel

Right

JBL

Front

Subwoofer

Channel

(optional)

Right

Side

Channel

Right Rear Channel

 

connect the two sets of termi-

 

nals (Fig. 9).

3.

To ensure proper left/right con-

 

nections, make sure that the

 

speaker is in the “upright” posi-

 

tion. The label on the back of the

 

speaker should be readable, not

 

upside down.

4.

Connect the speaker wire for the

distinct loudspeakers from one enclosure. This allows you to use a single P52OWS for both the left and right rear speakers in a 7- channel system. If you are using the P52OWS this way, please fol- low the instructions on page 3 (Application 3).

Placement (Application 1)

When using the P52OWS for the surround channels in a 5-channel home theater system or for side channels in a 6-or 7-channel home theater system, refer to Figures 1 and 2. The speakers should be placed perpendicular to or slightly behind the primary listening loca- tion, as shown.

Setting the Surround Configuration Selector

It is generally recommended that the selectable surround mode con- figuration be set to Bipole. This will provide a large ambient sur- round sound field while allowing for precise localization of sound effects that the filmmaker has placed in the surround tracks.

Left

Center

Right

JBL

Front

Front

Subwoofer

Channel

Channel

Channel

(optional)

 

 

Couch

 

Left

 

Right

Surround

 

Surround

Channel

 

Channel

Figure 1.

 

 

 

 

JBL

 

 

Subwoofer

 

 

(optional)

Left

Center

Right

Front

Channel

Front

Channel

 

Channel

Left

 

 

 

 

Right

Surround

 

 

 

 

 

 

Surround

Channel

 

 

Couch

 

 

Channel

 

 

 

 

 

 

 

 

Figure 2.

Placement (Application 2)

When using the P52OWS as a rear speaker(s) in a 6- or 7-channel home theater system, refer to Figures 4 and 5. The speaker(s) should be mounted on the rear wall facing the listening area, between the side channel speak- ers. If you are using one rear speaker, it should be mounted as close as possible to the center of the listening area. When using two rear speakers, they should be spaced evenly within the width of the listening area.

Setting the Surround Configuration Selector

When used as a rear channel speaker in a 6- or 7-channel sys- tem, it is recommended that the Surround Mode Configuration Switch be set to Bipole, as shown in Figure 6.

Figure 5. This overhead view shows a typical home theater plan when using two rear channel speakers.

RIGHT REAR speaker to the top

set of terminals (Fig. 10).

5. Connect the speaker wire for the

LEFT REAR speaker to the bot-

tom set of terminals (Fig. 10).

6. Set the mode configuration

switch to the Bipole position

(Fig. 6).

2

3

Image 2
Contents OWNER’S Guide JBL and Harman International are registered trademarksSetting the Surround Configuration Selector Proper Placement and SetupPlacement Application Planning Your SystemAttach speaker wire, as shown on Wiring the System WALL-MOUNTINGTo 18-gauge wire Applications 1Care of Your Speaker System Final Adjustments SpecificationsWeight 12.5 lb 5.7kg

P52OWS specifications

The JBL P52OWS is a remarkable offering in the realm of marine audio systems, designed to deliver exceptional sound quality even in the harshest of outdoor environments. Engineered with cutting-edge technology, the P52OWS is perfect for boating enthusiasts and outdoor adventurers who refuse to compromise on audio performance while navigating the waves.

A standout feature of the JBL P52OWS is its robust construction. This marine speaker has been specifically designed to endure exposure to moisture, UV rays, and salt, making it a reliable choice for various aquatic settings. With a weather-resistant enclosure and materials, users can enjoy their favorite tunes without worrying about the detrimental effects of the elements.

The sound performance of the P52OWS is another critical aspect that sets it apart. Equipped with high-quality components, this speaker delivers a balanced sound profile characterized by rich lows, articulate mids, and crisp highs. The system relies on advanced technologies like a powerful woofer and a meticulously designed tweeter to ensure that every note is reproduced with clarity, allowing for an immersive listening experience. The speaker is capable of producing an impressive sound level, making it ideal for both leisurely cruising and lively gatherings on deck.

Installation of the JBL P52OWS is user-friendly, featuring a mounting system that provides flexibility for various setups. Whether installed in a boat's cabin or mounted on an outdoor patio, the speaker ensures optimal audio distribution throughout the chosen space. Its stylish design also lends an aesthetic appeal to any marine or outdoor environment, seamlessly blending functionality with visual sophistication.

The JBL P52OWS is compatible with a wide range of audio sources, including smartphones, tablets, and marine stereos. This versatility allows users to easily connect their preferred devices to listen to music, podcasts, or navigation instructions during their adventures at sea.

In summary, the JBL P52OWS is engineered for superior audio performance while tackling the challenges of a marine environment. With its durable design, high-quality sound capabilities, and ease of installation, it's a fantastic choice for anyone looking to enhance their outdoor audio experience. Whether you're out on the water or relaxing in your backyard, the JBL P52OWS brings music to life like no other.