Hitachi 42PMA300A user manual Remote control, Loading Batteries, Handling the Remote Control

Page 9

Remote control

POWER OFF button

POWER ON button

MUTE button

RGB/VIDEO buttons

PinP button

AUTO button

MENU button

OK button

ID button

 

 

 

VOL

RGB 1

RGB 2

MUTE

VOL

AV1

AV2

AV3

AV4

AUTO PinP SIZE RECALL

MENU

OK

ID

ID SET

POWER ON/OFF button

VOLUME UP/DOWN buttons

SIZE button

RECALL button

RETURN button

SELECT/ADJUST buttons

ID SET button

ENGLISH

Loading Batteries

1. Open the battery cover.

• Slide back and remove the battery cover in the direction of the arrow.

2.Load batteries.

•Load two Size AA batteries included observing the correct polarities.

3.Close the battery cover.

•Replace the battery cover in the direction of the arrow and snap it back into place.

Handling the Remote Control

Use the remote control within about 5 m from front of the unit’s remote-control sensor and within 30 degrees on both sides.

With in 30

With in 30 degrees degrees

About 3m

About 3m

About 5m

CAUTION

•Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.

•When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.

ATTENTION

•Do not drop or impact the remote control.

•Do not splash the remote control with water or put it on a wet object to avoid possible failures.

•Before leaving the remote control out of use for an extended period of time, remove the batteries from it.

•If the remote control begins to lack responsiveness, replace the batteries.

•Strong light such as direct sunlight impinging on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 42PMA300A Features Contents About the Symbols Safety InstructionsBe cautious of the power cord connection Be sure to keep safety ground connectionBe careful in handling the battery of the remote control Safety Instructions Precaution during transportation Precautions for the cable connectionDo not physically impact the remote control Set the sound volume at a suitable levelMain Unit Component NamesRemote control Handling the Remote ControlLoading Batteries Installation Installation InstructionsAnti-tumble measures Securing to a wall or pillarMonitor rear panel Connecting to a PCPage Turning Power On and Off Operating InstructionsIndicating lamp Input Switching Operating Instructions Volume AdjustmentAudio Mute Status guide will be displayedInput Signal Screen Display Size SwitchingDisplay area selection diagram RGB input Normal Full Zoom1 Real* Zoom3 Zoom2Automatic Adjustment of Screen Position and the Clock Using the Menu Screen On-screen display systemOperating Instructions Independent Operation of Multiple Monitors ID NoPicture Menu Audio Menu Timer MenuFunction Menu Setup Menu Other Features Language MenuAutomatic Store Power Save Mode Other Features Signal CheckWhen the RGB1, RGB2 input is selected Status Display ActionMethods to Reduce the Occurrence of Image Retention Image Retention of Plasma DisplayAbout screen defects About residual imagesSymptoms That Seemingly Appear to be Failures TroubleshootingEnglish Troubleshooting Actions to Correct Abnormal Displays Signal Input Product SpecificationsRGB terminal D-sub 15-pin connector Pin Input signalRecommended Signal List Product Specifications Signal InputWith Digital RGB signal input RGB1 input DVI terminal DVI-DWith Analog RGB signal input RGB2 input Supplement Connecting to a Video Imaging Device With RGB component setupOptional Video Unit Function When you want to Display size selection diagramInput signal Display screen Remarks AV1 AV2 AV3 RGB2 RGB1 AV4Press Using a wide-screen monitorPictures Split Operating Instructions Displaying Multi PictureYNR YNR Operating Instructions Picture MenuCNR LTIMagenta Color ManagementColor Decoding Item is added to the Menu shownAV1 AV2 AV3AV4 Menu Display Registration condition RGB1Troubleshooting Scart connector pin specifications Input connector pin specificationsSignal mode Horizontal Dot clock Remarks Product Specifications Recommended Signal ListWith R, G, B Video input AV2 and AV4 input With component input AV1, AV2 and RGB2-component input

42PMA300A specifications

The Hitachi 42PMA300A is a high-performance plasma television that was designed to deliver an exceptional viewing experience. Launched in the early 2000s, this model quickly gained popularity due to its impressive picture quality, advanced technology, and user-friendly features. One of the key attractions of the Hitachi 42PMA300A is its 42-inch screen, which offers a generous viewing area, making it suitable for various home entertainment settings.

One of the standout features of the 42PMA300A is its plasma display technology. Plasma screens are known for their deep blacks, vibrant colors, and wide viewing angles, making them ideal for watching movies and sports. The resolution of the display is 852 x 480 pixels, which, while not as high as modern standards, delivers a satisfying picture quality, particularly for standard-definition content.

The 42PMA300A also incorporates Hitachi’s proprietary Image Enhancement technology, which optimizes the displayed image for more accurate color reproduction and improved clarity. This technology works to reduce motion blur and enhances the overall contrast, resulting in a more immersive viewing experience. Additionally, the television supports various aspect ratios, allowing users to enjoy content in both widescreen and standard formats without sacrificing picture quality.

Connectivity is another area where the Hitachi 42PMA300A shines. The television is equipped with multiple input options, including HDMI, component, and composite video inputs. This flexibility makes it easy to connect various devices, such as DVD players, gaming consoles, and cable boxes. The inclusion of a built-in tuner means that users can enjoy over-the-air broadcasts without the need for additional equipment.

In terms of design, the Hitachi 42PMA300A sports a sleek and modern appearance, with a thin bezel that maximizes the screen size while minimizing the footprint. The television can be mounted on a wall or placed on a stand, offering versatility in installation.

Overall, the Hitachi 42PMA300A is a well-rounded plasma television that offers a blend of quality and convenience. With its impressive features, user-friendly design, and advanced technologies, it remains a notable choice for those looking to enhance their home entertainment setup.
Top Page Image Contents