Hitachi 8000 manual Enww

Page 24

8.If you are adding a second SODIMM, remove the SODIMM from the top XMM1 socket to access the bottom XMM3 socket. Press outward on the two latches on each side of the SODIMM (1) then pull the SODIMM out of the socket (2).

Figure 2-9Removing a SODIMM

9.Slide the new SODIMM into the socket at approximately a 30° angle (1) then press the SODIMM down (2) so that the latches lock it in place.

Figure 2-10Installing a SODIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.

A SODIMM must occupy the XMM1 (top) socket.

10.Replace the SODIMM in the XMM1 socket if it was removed.

11.Replace the access panel.

18 Chapter 2 Hardware Upgrades

ENWW

Image 24

Contents Hardware Reference Guide Page About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesDrive configuration may vary by model Front Panel ComponentsRear Panel Components 2Rear Panel ComponentsUsing the Windows Logo Key KeyboardKeyboard 5Serial Number and Product ID Location Product Features Serial Number LocationHardware Upgrades Serviceability FeaturesConnecting the Power Cord 1Connecting the Power Cord Hardware UpgradesRemoving the Computer Access Panel 2Removing the Computer Access PanelReplacing the Computer Access Panel 3Replacing the Computer Access Panel Hardware UpgradesRemoving and Replacing the Front Bezel Enww Removing a Bezel Blank 6Removing a Bezel BlankChanging from Desktop to Tower Configuration Installing Additional Memory SODIMMsDDR3-SDRAM SODIMMs Populating Sodimm Sockets 8SODIMM Socket LocationsInstalling SODIMMs Enww Replacing the Optical Drive Removing the Existing Optical DriveInstalling the New Optical Drive Preparing the New Optical DriveEnww 14Unlocking the Hard Drive Carrier Hardware Upgrades Replacing the Hard DriveReplacing the Hard Drive Enww Enww Installing and Removing a Port Cover 22Removing a Port Cover Hardware UpgradesSpecifications Table A-1SpecificationsAppendix a Specifications Battery Replacement Type Enww Installing a Security Lock Security Lock ProvisionsHP/Kensington MicroSaver Security Cable Lock Figure C-2Installing a Cable with a Port Cover Installed PadlockHP Business PC Security Lock Front Bezel Security Figure C-7Engaging the LockEnww Enww Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex Enww

8000 specifications

The Hitachi 8000 series is a well-established line of excavators known for their robustness, versatility, and advanced technology. Primarily designed for demanding construction and mining environments, these machines are built to deliver exceptional performance, efficiency, and operator comfort.

One of the defining features of the Hitachi 8000 excavators is their powerful hydraulic system. The machines are equipped with high-capacity hydraulic pumps that offer significant digging force and lifting capabilities. This hydraulic system allows for smooth operation and rapid cycle times, making the Hitachi 8000 series highly effective in both earthmoving and material handling applications.

The engine technology in the Hitachi 8000 series is also noteworthy. These excavators are powered by advanced, fuel-efficient diesel engines that meet strict environmental regulations. This not only ensures compliance with global emissions standards but also reduces operational costs through improved fuel consumption. The engine is complemented by a sophisticated cooling system that maintains optimal operating temperatures, enhancing reliability and extending the machine’s life.

Another significant aspect of the Hitachi 8000 series is its advanced operator comfort and safety features. The cab is designed to provide an ergonomic working environment, equipped with adjustable seating, climate control, and intuitive controls. Large windows afford excellent visibility, aiding operators in maneuvering within tight spaces. Safety features, including robust ROPS and FOPS structures, contribute to a secure working experience on-site.

Hitachi's commitment to technological innovation is evident in the integration of digital tools and telematics. The machines come with advanced monitoring systems that provide real-time data on performance, fuel consumption, and maintenance needs. This feature allows operators and fleet managers to optimize operations, reduce downtime, and implement predictive maintenance strategies effectively.

Versatility is another hallmark of the Hitachi 8000 series. These excavators are compatible with a wide range of attachments, including buckets, breakers, and grapples, making them suitable for various tasks from digging and trenching to demolition and landscaping.

In conclusion, the Hitachi 8000 series stands out in the realm of large excavators, combining powerful performance with advanced technology and operator-centric design. With its robust features, economic operational capabilities, and unwavering reliability, it is a preferred choice for contractors and operators seeking a high-performance machine to tackle the toughest jobs in the construction and mining sectors.