Hitachi CP-X985W user manual Input Menu Description

OPERATIONS (continued)

Input Menu

The following functions are available when INPUT is selected on the

menu. Select an item with the and buttons, and start or stop

operation with the and buttons. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P.IN P. window on RGB input mode.

SETUP	INPUT	IMAGE	OPT.	ENGLISH
AUTO		EXECUTE
RGB		CANCEL
VIDEO
VIDEO NR
Progressive
BLACK

Table 5. Input Menu

Item	Description
	Automatic Adjustment at RGB Input: Select the EXECUTE with the
	button. Horizontal position (H.POSIT), vertical position (V.POSIT), clock
	phase (H.PHASE), and horizontal size (H.SIZE) are automatically adjusted.
	Use with the window at maximum size in the application display.
AUTO	Automatic Adjustment at Video Input: Select the EXECUTE with the
	button. A signal type appropriate for the input signal is selected
	automatically when EXECUTE is selected automatically. Valid only when
	AUTO is set for VIDEO on the menu.
	• This operation requires approximately 10 seconds. It may not function correctly with
	some input signals. Pressing the AUTO button in this case may correct this problem.
	• This function is the same as for the AUTO function in Basic operation.
RGB	Displays RGB Input Frequency: Displays the horizontal and vertical sync
	signal frequencies for RGB input.
	• Valid only at RGB input.

Select Video Signal Type: Select the signal type with the and buttons. Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the input signal. The selection of AUTO enables and executes the function AUTO (Automatic Adjustment at Video Input), except for the N-PAL input.

•Use this function when the image becomes unstable (eg. the image becomes VIDEO (**) irregular, or lacks color) at VIDEO/S-VIDEO input.

•Automatic Adjustment requires approximately ten seconds. It may not function correctly with some input signals. Pressing the AUTO button in this case may correct this problem except for the N-PAL input.

•For the COMPONENT VIDEO input, this function is not effective and the signal type is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the signal of HDTV.

VIDEO NR	Set/Clear Noise Reduction Mode: Select the TURN ON / TURN OFF with
	the /	button. When the TURN ON is selected, the NR mode is active
(**)
	and the noise on screen of the video input will be reduced.
	Select Progressive Mode: Select the mode suitable for the input signal
	with the	and buttons. The TV mode and the CINEMA mode convert
Progressive the interlaced video signal into the progressive signal. The CINEMA mode is

(**)adptable 2-3 Pull-Down system to the conversion.

• Use this function to raise resolution, at the interlaced video input except HDTV signal.

	Set/Clear Black Enhancement Mode: Select the TURN ON / TURN OFF
BLACK(**)	with the / button. When the TURN ON is selected, the black
	enhancement mode is active and the contrast ratio of the screen for the
	video input will be raised by making black level darker.

ENGLISH-13