Dolby PRO Logic NON-DIGITAL Line Level

DOLBY PRO LOGIC (NON-DIGITAL) – LINE LEVEL

Use this installation method for Dolby Pro Logic appli- cations (not Dolby Digital, DTS or other digital process- ing), where the receiver/ processor is equipped with a subwoofer output, or a

volume-controlled preamp (line-) level output:

Use RCA-type patch cords to connect the line-level subwoofer outputs on your receiver or amplifier to the line-level inputs on the sub- woofer. IMPORTANT: Do not

use the LFE input on the sub- woofer with Dolby Pro Logic processors. NOTE: If your receiver or amplifier only has one subwoofer output jack, then you will need to use a Y-connector (not included). Plug the male end of the Y- connector into your receiver

Left Front			Center			Right Front
+	–		+	–		+	–
+	–					+	–
			Subwoofer
			Line-
			Level In
			L
			R
			Receiver
	Left		Subwoofer		Right
	Front			Out	Front
	+	–			+	–
			R	L
			+	–
	Left		Center		Right
	Left		Surround Back		Right
	Surround		Surround Back		Surround
	+	–	+	–	+	–

Left Surround

Surround Back

Right Surround

–

or amplifier’s subwoofer out- put jack, and connect each of the two female ends to separate RCA-type patch cords. Finally, plug the RCA- type patch cords into the line-level inputs on the sub- woofer.

Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure your receiver or processor is correctly con- figured to indicate that the subwoofer is “On.”

Note for advanced users: If your receiver/processor has a built-in low-pass crossover filter for the subwoofer out- put, you may use the LFE input to bypass the sub- woofer’s internal crossover.

DOLBY DIGITAL OR DTS

(OR OTHER DIGITAL SURROUND MODE) CONNECTION

RECEIVER	SUBWOOFER
	LINE LEVEL IN
LFE OUT	L
LFE OUT	LFE INPUT
	R

Use this installation method for Dolby Digital, DTS or other digital surround processors:

Use the line-level input jack marked “LFE” for the Low- Frequency Effects channel.

Connect this jack to the LFE output or subwoofer output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

Make sure that you have configured your surround sound processor for “Subwoofer On.” The receiver should be config-

ured for 6.1-channel opera- tion (if available), and the front left, front right, center and rear speakers should all be set to “Small.” If your receiver allows you to set the crossover frequency between the subwoofer and the main speakers, select either 120Hz or 150Hz, or select the setting that is the closest frequency below these.

SCS136 specifications

The JBL SCS136 is a standout solution in the realm of home audio systems, designed to elevate your listening experience with its exceptional sound quality and innovative features. Known for its sleek design and powerful performance, the SCS136 is an ideal choice for home theater enthusiasts and audiophiles alike.

One of the main features of the JBL SCS136 is its robust satellite speakers, which are compact yet capable of delivering high-quality audio. The accompanying subwoofer is designed to reproduce deep bass frequencies, ensuring that users can enjoy a full range of sound whether they're watching movies or listening to music. The subwoofer houses a large driver, which amplifies both the richness and clarity of the audio output, making every sound immersive.

The SCS136 incorporates advanced technologies that enhance the overall performance of the system. One such technology is the Dolby Digital and DTS decoding capability, which allows for a truly cinematic audio experience. With this feature, users can expect rich surround sound that brings movies and music to life, creating an immersive atmosphere that captivates listeners.

Additionally, the SCS136 features JBL's proprietary technologies that optimize speaker performance. The high-frequency drivers are engineered with precision to ensure accurate sound reproduction across all audio frequencies. This attention to detail means that vocals are clear and distinct while the instrumentation is well balanced, making it suitable for various genres of music and types of media.

Installing the JBL SCS136 is straightforward, thanks to its user-friendly design. The system comes with all necessary cables and connectors, allowing users to set it up with minimal hassle. Furthermore, the compact size of the satellite speakers makes it easy to integrate them into any home decor without taking up too much space.

The build quality of the JBL SCS136 is another highlight. The speakers are constructed with durable materials that not only enhance their longevity but also contribute to the overall aesthetic appeal. The sleek finish complements modern interiors, making these speakers a visually pleasing addition to any room.

In summary, the JBL SCS136 is a powerful home audio system that combines quality, technology, and design. With its ability to deliver stunning sound performance, easy installation, and stylish appearance, it stands out as a top choice for anyone looking to enhance their audio experience at home.