Hitachi IPJ-AW250N user manual Connection, Network Bridge Communication

Page 15

Network Bridge Communication

Network Bridge Communication

This projector is equipped with NETWORK BRIDGE function.

When the projector connects to the computer by LAN communicaton, an external device that is connected with this projector by RS-232C communication can be controlled from the computer as a network terminal.

For details, see the 6. Network Bridge Function - Network Guide.

Connection

1. Connectcable. the computer's LAN port and the projector's LAN port with a LAN 2. Connect the projector's CONTROL port and the RS-232C port of the

devices that you want to control with a RS-232C cable.

3. Turnon. the computer on, and after the computer has started up turn the projector

Set the COMMUNICATION TYPE to NETWORK BRIDGE. (OPTION menu -

4. SERVICE - COMMUNICATION in the User's Manual - Operating Guide)

LAN

LAN

CONTROLRS-232C

15

Image 15

Contents IPJ-AW250N Example of computer signalInitial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the portsVideo SCL SDACEC USB Type a USB Type B To input component video signal to Computer in ports RS-232C Communication ConnectionCRC Communicaion settingsResponse code / Error code h shows hexadecimal Command Control via the Network Port1 Port Communicaion PortTCP #9715 Command format Command control settingsAutomatic Connection Break AuthenticationNetwork Bridge Communication Communication settings RS-232C Communication / Network command table Gamma Gain B Color TempGain R Gain GTint Offset BColor Temp Offset B ColorExecute PhaseAuto Adjust SizeFrame Lock Hdmi RangeComputer IN1 Computer IN2Auto ECO PerfectMonitor OUT ECO ModeVolume MirrorType a Volume HdmiVolume LAN Volume USBLanguage MIC VolumeHdmi Audio MIC LevelMenu Position MenuPosition H Menu Position HDisplay Power onAuto Power TemplateMY BUTTON-2 MY BUTTON-1High MY SourceRemote Freq NormalAvmt ? PJLink commandLamp ?