Hitachi ED-X52 user manual Auto Power, Off, Lamp Time

Page 55

OPTION menu

Item

Description

 

 

 

Using the ▲/▼ buttons adjusts the time to count down to

 

automatically turn the projector off.

 

Long (max. 99 minutes) Ù Short (min. 0 minute = DISABLE)

AUTO POWER

When the time is set to 0, the projector is not turned off automatically.

OFF

When the time is set to 1 to 99, and when the passed time with no-

 

signal or an unsuitable signal reaches at the set time, the projector

 

lamp will be turned off.

 

If one of the projector's buttons or the remote control buttons

 

is pressed or one of the commands (except get commands) is

 

transmitted to the CONTROL port during the corresponding time,

 

projector will not be turned off.

 

Please refer to the section “Turning off the power” ( 14).

 

The lamp time is the usage time of the lamp, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the ► button

 

of the projector displays a dialog.

LAMP TIME

To reset the lamp time, select the OK using the ► button.

CANCEL Ö OK

 

 

• Please reset the lamp time only when you have replaced the lamp,

 

for a suitable indication about the lamp.

 

• For the lamp replacement, see the section "Replacing the lamp"

 

( 56, 57).

 

The filter time is the usage time of the air filter, counted after the last

 

resetting. It is shown in the OPTION menu.

 

Pressing the RESET button on the remote control or the ► button

 

of the projector displays a dialog.

FILTER TIME

To reset the fi lter time, select the OK using the ► button.

CANCEL Ö OK

 

 

• Please reset the filter time only when you have cleaned or replaced

 

the air filter, for a suitable indication about the air fi lter.

 

• For the air fi lter cleaning, see the section “Cleaning and replacing

 

the air fi lter” ( 58, 59).

(continued on next page)

46

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Thank you for purchasing this projector About this manualTrademark acknowledgment Projector Typical SymbolsNever disassemble and modify Never use the projector if a problem should occurUse special caution for children and pets Do not insert liquids or foreign objectBe sure to connect with ground wire Be cautious of High temperatures of the projectorNever look through the lens or openings when the lamp is on Be cautious of the power cord connectionBe careful in handling the light source lamp Be careful in handling the battery of the remote controlAvoid a smoky, humid or dusty place Avoid a high temperature environmentBe careful in moving the projector Do not put anything on top of the projectorTake care of the lens Remove the power cord for complete separationDo not give the remote control any physical impact Take care of the cabinet and the remote controlAbout consumables About displaying characteristicTurn the power on/off in right order Connecting with notebook computerLamp For the Customers in Canada FCC Statement WarningContents Checking the contents of package HOT Part namesProjector HOTVideo port Audio IN1 port Audio IN2 port Audio OUT port Control panelRear panel STANDBY/ON buttonMagnify on button Magnify OFF button Remote controlDown button Volume + button Computer buttonArrangement Setting upOn a horizontal surface Suspended from the ceiling Arrangement Speakers Connecting your devicesMonitor VCR/DVD/Blu-ray Disc playerAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyHitachi MAXELL, Part No.LR6 or R6P Remote controlInstalling the batteries About the remote control signalUsing as a simple PC mouse & keyboard STANDBY/ON button Power indicator Power on/offTurning on the power Turning off the powerPrecaution for lens cover attachment and removal Temporarily muting the sound Adjusting the volumeSelecting an input signal OperatingMY Source Press the MY Source / DOC. Camera button onComputer button Video buttonSearch button Searching an input signal€ For no signal 43 fi xed Selecting an aspect ratioAdjusting the zoom and focus Adjusting the projectors elevatorAfter a few seconds Using the automatic adjustment featureAdjusting the position € For a computer signalKeystone button Correcting the keystone distortionsMagnify ON/OFF button Using the magnify featureBlank button Temporarily freezing the screenTemporarily blanking the screen Freeze buttonInput button Enter button Using the menu functionESC button Reset button Advanced MenuIndication Meaning Indication in OSD On Screen DisplayAuto Keystone Picture ModeDescription AspectFilter Time ECO ModeReset MirrorGamma Picture menuBrightness ContrastSharpness Color TempColor TintMY Memory LOAD-1,LOAD-2,LOAD-3,LOAD-4 Over Scan For a computer signalFor no signal Image menuExecute PhaseAuto Adjust SizeVideo NR Input menuComputer Video FormatFrame Lock Resolution Due to the forward/backward setup angle by itself Setup menuMonitor OUT Bright Ù NormalAudio menu VolumeSpeaker Start UP Screen menuMenu Position BlankDescription MyScreen Capturing error has occurred. Please try againMyScreen registration is finished Message MyScreen LockSource Name MAP2 Ù MAP1 Ù CIRCLE2 Ù CIRCLE1 Ù DOT-LINE4 TemplateChannel Description Closed CaptionDisplay ModeAuto Search Option menuAuto OFF Auto PowerLamp Time MY Button Filter Message ServiceFAN Speed GhostKEY Lock Factory ResetInformation Security PasswordSecurity menu Enter the Security menuTurning off the MyScreen Password Turning on the MyScreen PasswordMyScreen If you have forgotten your PIN Code PIN LockTurning on the PIN Lock Turning off the PIN LockTurning on the Transition Detector Transition DetectorTurning off the Transition Detector Turning on the MY Text Password MY Text PasswordTurning off the MY Text Password Writing MY TextReplacing the lamp MaintenanceReplacing the lamp Type number DT01141Lamp warning High Voltage High TemperatureType number UX36761 Filter set Cleaning and replacing the air filterCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorInternal temperature is rising TroubleshootingMessage Description There is no input signal An improper signal is inputRegarding the indicator lamps Has become heated Resetting all settingsIt is time to clean the air filter There is a possibility that the interior portionInput changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workMute function is working Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableLamp is approaching the end of its product Lifetime ECO Mode function is workingNot properly adjusted Frame Lock function cannot work on Current input signalSpecifications SpecificationsSpecification 221 306 ED-X50/ED-X52 ContentsImportant safety instruction Entries and graphical symbols explanationFirst of all About Electro-Magnetic Interference Canada Regulatory noticesContents of package Holding the hook part of the battery Cover, remove it Loading batteries into the remote controlPreparations Arrangement Connecting your devices Turning on the power Connecting power supplyAdjusting the projectors elevator Input button Displaying the pictureSTANDBY/ON button Turning off the powerReplacing the lamp Shorten the life of this product Cleaning and replacing the air filter Using the CD manual Filter set UX36761 SpecificationsTroubleshooting Warranty and after-service Page ED-X50/ED-X52 Example of PC signalInitial set signals Computer IN1, B Computer IN2, C Monitor OUT Connection to the portsVideo Audio IN1, G Audio IN2 USB To input component video signal to Computer in ports RS-232C Communication ConnectionControl port CRC flag Communication settingsType, Setting code Header code, Packet, Data sizeRS-232C Communication command table Gamma Be EF 1A FF Color Size Frame Lock Be EF FD CD Computer IN2 Not all of the languages in the table are supported On next OFF Be EF FB D8 Be EF Lamp Time Computer IN1 Be EF Computer IN2 Video Information Hitachi Europe S.r.l Hitachi Europe S.A.S., Digital Media GroupHitachi Europe GmbH Hitachi Europe S.A

ED-X52 specifications

The Hitachi ED-X52 is a powerful and compact multimedia projector designed for a wide range of applications, making it suitable for both educational and business environments. With a focus on delivering high-quality visuals and user-friendly features, the ED-X52 stands out in its category.

One of the key features of the Hitachi ED-X52 is its impressive brightness, reaching up to 3,200 ANSI lumens. This high brightness level ensures that presentations remain clear and vivid, even in well-lit rooms. Whether in classrooms or conference halls, users can rely on the ED-X52 to provide a clear image without sacrificing quality.

The projector boasts a native XGA resolution of 1024x768 pixels, which delivers sharp and detailed images. It is especially beneficial for displaying text-heavy presentations, as the clarity allows for easy reading from a distance. Furthermore, the ED-X52 supports a range of input options, including HDMI, VGA, and composite video, ensuring compatibility with various devices such as laptops, DVD players, and document cameras.

Another notable feature of the Hitachi ED-X52 is its advanced image processing technology. With features like the keystone correction and a variety of zoom options, users can easily adjust the projected image to fit their space optimally. The lens shift capability also adds versatility, allowing projection from various angles without compromising image quality.

The ED-X52 is designed with user convenience in mind. It comes equipped with a straightforward remote control, enabling users to navigate menus and adjust settings effortlessly. Additionally, its lightweight and compact design make it easy to transport, making it an excellent choice for on-the-go professionals or educators who require a reliable projector for multiple locations.

The projector also integrates eco-friendly technologies, promoting energy efficiency and reducing operational costs. The lamp life extends up to 5,000 hours in normal mode and up to 10,000 hours in eco mode, allowing users to enjoy extended periods of use before needing replacements.

In conclusion, the Hitachi ED-X52 is a versatile and efficient projector that excels in delivering high-quality visuals in diverse environments. Its combination of brightness, resolution, and user-friendly features makes it an ideal choice for educators and business professionals seeking reliable projection solutions. With its advanced technologies and compact design, the ED-X52 continues to meet the demands of modern presentation needs.
Top Page Image Contents