JBL KHM10 manual Specifications

Page 4

If the system plays at low volumes but shuts off as volume is increased:

Check all wires and connec- tions between receiver/ amplifier and speakers.

Make sure all wires are con- nected. Make sure none of

the speaker wires are frayed, cut or punctured.

If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier.

If there is no (or low) bass output:

Make sure the polarities (+ and –) of the left and right “Speaker Inputs” are con- nected properly.

Consider adding a powered subwoofer to your system.

SPECIFICATIONS

 

KHM10

Description

3-Speaker, 2-way 250mm (10") karaoke monitor

Maximum Recommended Amplifier Power**

175W

Power Handling (Continuous/Peak)

50W/400W

Nominal Impedance

8 Ohms

Sensitivity (2.83V/1m)

92dB

Frequency Response (–3dB)

40Hz – 20kHz

Crossover Frequency

1,700Hz

High-Frequency Transducers

Dual 75mm (3") cones with high-temperature voice coil

Low-Frequency Transducer

250mm (10") Cone with high-temperature

 

voice coil, shielded

Baffle

Low diffraction, IsoPower

Ports

Dual FreeFlowflared

Network

Straight-Line Signal Path(SSP)

 

with left and right high-frequency trim controls

Terminals

Gold-plated, 5-way binding posts

Dimensions (H x W x D)

330mm x 533mm x 241mm (13" x 21" x 9-1/2")

Weight per Speaker

12.7kg/28 lb

STEAL THE SHOW

GO PRO

® PRO SOUND COMES HOME

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA 8500 Balboa Boulevard, Northridge, CA 91329 USA

2, route de Tours, 72500 Chateau-du-Loir, France 516.255.4JBL (4525) (USA only) www.jbl.com

© 2005 Harman International Industries, Incorporated. All rights reserved.

JBL is a registered trademark of Harman International Industries, Incorporated.

Part No. 000-111

Declaration of Conformity

We, Harman Consumer Group International 2, route de Tours

72500 Chateau-du-Loir France

declare in own responsibility that the product described in this owner’s manual is in compliance with technical stan- dards:

EN 61000-6-3:2001

EN 61000-6-1:2001

Laurent Rault

Harman Consumer Group International

Chateau-du-Loir, France 5/05

**The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.

All features and specifications are subject to change without notice.

All dimensions include grilles.

Image 4
Contents OWNER’S Guide Speaker Placement Thank YOU for Choosing JBLKaraoke Phenomenon Wall and Ceiling MountingTroubleshooting Speaker ConnectionsTrim Controls Connection TipsSpecifications KHM10

KHM10 specifications

The JBL KHM10 is a cutting-edge headphone model developed by the renowned audio equipment manufacturer JBL. It combines innovative technology and design to cater to audio enthusiasts who prioritize sound quality, comfort, and modern features.

One of the standout features of the JBL KHM10 is its high-fidelity sound performance. Equipped with large dynamic drivers, these headphones deliver a powerful and immersive listening experience with clear highs, robust mids, and deep bass. This wide frequency range ensures that all aspects of your music are produced faithfully, making it suitable for various genres including classical, rock, and electronic music.

The headphones also incorporate JBL's signature Sound Signature technology, which fine-tunes audio playback to align with the needs of music lovers. This technology enhances sound clarity while minimizing distortion, allowing for a crisp and clean listening experience even at higher volume levels.

Comfort is another key characteristic of the JBL KHM10. The headphones are designed with plush ear cushions that provide excellent isolation and a snug fit. Their lightweight construction reduces fatigue, making them ideal for extended listening sessions whether at home or on the go. The adjustable headband ensures a personalized fit for various head sizes, further enhancing comfort.

In terms of connectivity, the KHM10 is equipped with a versatile wired connection, making them compatible with a multitude of devices. The inclusion of a tangle-free cable design helps to keep your listening experience hassle-free, while the gold-plated audio jack ensures a secure and reliable connection.

A notable technology incorporated into the KHM10 is the seamless integration of voice control features. This allows users to easily manage playback and phone calls, providing convenience for multitasking in everyday life. The built-in microphone offers clear call quality, enabling hands-free communication without compromising audio performance.

Lastly, the JBL KHM10 is crafted with durability in mind, featuring robust materials that are built to withstand daily wear and tear. This longevity adds value to the headphones, making them a worthwhile investment for those seeking a quality audio experience.

In conclusion, the JBL KHM10 headphones represent the perfect blend of advanced audio technology, comfort, and durability. With their high-fidelity sound, ergonomic design, and convenient features, they cater to both casual listeners and audiophiles.