Hitachi CP-X615 user manual Port Settings, Displays and configures communication port settings

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

3.1.4 Port Settings

Displays and configures communication port settings.

	Item	Description
Network Control Port1		Configures command control port 1 (Port:23).
(Port:23)
	Port open	Click [Enable] check box to use port 23.
	Authentication	Click [Enable] check box when authentication is required for
		this port.
Network Control Port2		Configures command control port 2 (Port:9715).
(Port:9715)
	Port open	Click [Enable] check box to use port 9715.
	Authentication	Click [Enable] check box when authentication is required for
		this port.
Image Transfer Port		Configures the image transfer port (Port:9716).
(Port:9716)
	Port open	Click the [Enable] check box to use port 9716.
	Authentication	Click the [Enable] check box when authentication is required
		for this port.
SNMP Port		Configures the SNMP port.
	Port open	Click [Enable] check box to use SNMP.
	Trap address	Configures the destination of the SNMP Trap in IP format.
SMTP Port		Configures the SMTP port.
	Port open	Click [Enable] check box to use the e-mail function.

Click [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

17