Installing Cartridges |
| Selecting Books |
|
|
|
Warning: Never install or remove a cartridge when BOOKMAN is on. If you do, information that you entered in its
1.Turn BOOKMAN off.
2.Turn BOOKMAN over.
3.Align the tabs on the book cartridge with the notches in the slot.
4.Press the cartridge until it snaps into place.
➤Removing Cartridges
Warning: When you remove a book cartridge to install another, information that you entered in the removed cartridge will be erased.
Once you have installed a book car- tridge in your BOOKMAN, you must select which book you want to use.
1.Turn BOOKMAN on.
2.Press CARD .
These are sample books.
3.Press 
or 
to highlight the book you want to use.
4.Press ENTER to select it.
➤Resuming Where You Left Off
You can turn off BOOKMAN at any screen. When you turn BOOKMAN on again, the screen that you last viewed appears.
3