Subwoofer Controls, Rear Panel, Subwoofer Connections

SUBWOOFER CONTROLS

PHASE

™

£ ¢

	∞
CS80SUB	§

FUSE	120V–60Hz
T 2.5A L 250V	200Watts

1Subwoofer-Level Control

2Phase Switch

3LFE Input

4Line-Level Inputs

5Power Indicator LED

6Power Switch

If you have a Dolby® Digital or DTS® receiver/processor with a low-frequency-effects (LFE) or subwoofer output:

RECEIVER/PROCESSOR

SUBWOOFER OR

LFE OUTPUT

15' (4.5m) Subwoofer cable included

If your receiver/processor does not contain a Dolby Digital or DTS processor but has a subwoofer output:

RECEIVER/PROCESSOR

15' (4.5m) Subwoofer cable included

NOTE: If your receiver/processor has only one sub out, you may use either the L or R input.

Important!

Whenever changing cables, pulling plugs, etc., ALWAYS TURN OFF ALL EQUIPMENT, including the subwoofer.