NEC VT575, VT676 manual Appendix Battery Installation, Operating Range for Wireless Remote Control

7. Appendix

Battery Installation

1 Remove the battery cover. NOTE: Do not pull the battery cover by force. Doing so can result in it coming off.

2

1

2 Remove both old batteries and install new ones (AAA). Ensure that you have the batteries' po- larity (+/ –) aligned correctly.

2

1

3 Slip the cover back over the bat-

teries until it snaps into place.

NOTE: Do not mix different types of batteries or new and old batteries.

Operating Range for Wireless Remote Control

Remote sensor on projector cabinet Remote control

7m/22 feet

30°

30°

30°

30°

7m/22 feet

•The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet.

•The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor.

Weak batteries will also prevent the remote control from properly operating the projector.

Remote Control Precautions

•Handle the remote control carefully.

•If the remote control gets wet, wipe it dry immediately.

•Avoid excessive heat and humidity.

•If you will not be using the remote control for a long time, remove the batteries.

•Do not place the batteries upside down.

•Do not use new and old batteries together, or use different types of batteries together.

•Dispose of used batteries according to your local regulations.

66