Dd Aa Cc, Attaching Adapter Plate to Projector

Attaching Adapter Plate to Projector

3	Align shoulder on connection block opposite notch
3	in adapter plate. Attach adapter plate to connection		CONNECTIONBLOCK
	block from projector mount assembly (A) using two
	#10-32 x 3/8" serrated washer head socket pin	NOTCHINDICATES
	screws (C) as shown in figure 3.1.	NOTCHINDICATES
	screws (C) as shown in figure 3.1.	FRONTOFPROJECTOR	SHOULDER
		FRONTOFPROJECTOR	SHOULDER

	AA
C	fig. 3.1

4	*Notch indicates front of projector.
	Flip projector upside down and attach adapter

plate (AA) using two serrated socket pin screws (BB) and retaining spacers (CC) as shown below. Tighten using 4 mm allen wrench (DD).

BBAA

CC*

5	Secure adapter plate with two knurled knobs (DD)
	and retaining spacers (CC) in remaining hole.

NOTE: Retaining spacers (CC) go between the projector and adapter plate (AA).

8 of 10

ISSUED: 03-06-08 SHEET #: 055-9255-1

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.