NEC VT37 manual Appendix Using Remote Mouse Receiver, When connecting using the USB terminal

7. Appendix

Using Remote Mouse Receiver

The remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations.

Connecting the remote mouse receiver to your computer

If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB port (type A).

NOTE: Depending on the type of connection or OS installed on your computer, you may have to restart your computer or change your computer settings.

Computer

Remote mouse receiver

To USB port of PC or Macintosh

When operating a computer via the remote mouse receiver

7m/22 feet

30˚

30˚

Remote sensor on the remote mouse receiver

When connecting using the USB terminal

For PC, the mouse receiver can only be used with a Windows 98/Me/XP* or Windows 2000 operating system.

* NOTE: In Windows XP, if the mouse cursor will not move correctly, do the following:

Clear the Enhance pointer precision check box underneath the mouse speed slider in the Mouse Properties dialog box [Pointer Options tab].

NOTE: Wait at least 5 seconds after disconnecting the mouse receiver before reconnecting it and vice versa. The computer may not identify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals.

Operating your computer’s mouse from the remote control

You can operate your computer's mouse from the remote control.

PAGE UP/DOWN Button	scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint
	on your computer.
Mouse Button	moves the mouse cursor on your computer.
L-CLICK Button	works as the mouse left button.
R-CLICK Button	works as the mouse right button.

62