NEC VT465 manual Information, Default

Page 29

Enabling Auto Adjust [Auto Adjust]

When “Auto Adjust” is set to “On”, the projector automatically deter- mines the best resolution for the current RGB input signal to project an image using NEC’s Advanced AccuBlend Intelligent Pixel Blend- ing Technology.

The image can be automatically adjusted for position and stability; “Horizontal Position”, “Vertical Position”, “Clock” and “Phase”.

On

Automatically adjusts image “Horizontal Position”,

 

“Vertical Position”, “Clock” and “Phase”.

Off

User can adjust the image display functions (“Hori-

 

zontal Position”, “Vertical Position”, “Clock” and

 

“Phase”) manually.

Adjusting Position/Clock (when Auto Adjust is off)

This allows you to manually adjust the image horizontally and verti- cally, and adjust Clock and Phase.

<Horizontal/Vertical>

Adjusts the image location horizontally and vertically.

This adjustment is made automatically when the Auto Adjust is turned on.

<Clock>

Use this item with the “Auto Adjust off” to fine tune the computer image or to remove any vertical banding that might appear. This func- tion adjusts the clock frequencies that eliminate the horizontal band- ing in the image. This adjustment may be necessary when you con- nect your computer for the first time. This adjustment is made auto- matically when the Auto Adjust is turned on.

<Phase>

Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.)

Use “Phase” only after the “Clock” is complete.

This adjustment is made automatically when the Auto Adjust is turned on.

Selecting Communication Speed [Communication Speed]

This feature sets the baud rate of the PC Control port (DIN 8 Pin). It supports data rates from 4800 to 19200 bps.

The default is 19200 bps.

Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recom- mended for long cable runs).

Information

Displays the status of the current signal and lamp usage. This item has three pages. The information included is as follows:

[Page 1]

[Page 3]

Source Index

Remaining Lamp Time (%)*

Horizontal Frequency

Lamp Hour Meter (H)

Vertical Frequency

Filter Usage

Sync Polarity

Projector Usage

 

* The progress indicator shows the

[Page 2]

percentage of remaining bulb life.

Signal Type

The value informs you of the

Video Type

amount of lamp usage. When the

Sync Type

remaining lamp time reaches 0,

Interlace

the Remaining Lamp Time bar in-

 

dicator changes from 0% to 100

 

Hours and starts counting down.

 

If the remaining lamp time reaches

 

0 hours, the projector will not turn

 

on regardless of whether the lamp

 

mode is set to Normal or Eco.

Default

Returning to Factory Default [Factory Default]

The Factory Default feature allows you to change adjustments and set- ting to the factory preset for source except the following:

<Current Signal>

Resets the adjustments for the current signal to the factory preset lev- els.

The items that can be reset are: Brightness, Contrast, Color, Hue, Sharp- ness, Aspect Ratio, Horizontal Position, Vertical Position, Clock, Phase and Picture Management.

<All Data>

Reset all the adjustments and settings for all the signals to the factory preset.

The items can be reset except Language, Security, Communication Speed, Remaining Lamp Time, Lamp Hour Meter, Filter Usage and Pro- jector Usage. To reset the lamp usage time, see “Clear Lamp Hour Meter” and “Clear Filter Usage”.

Resetting the Filter Usage Hours [Clear Filter Usage]

Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation.

Clearing Lamp Hour Meter [Clear Lamp Hour Meter]

Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation.

NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service. If this happens, press the “Help” button on the remote control for ten seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.

E-29

Image 29
Contents VT660K/VT560/VT465 Safety Cautions Whats in the Box? Fire and Shock PrecautionsLamp Replacement Table of Contents Introduction to the Projector Features youll enjoyIntroduction Attaching the supplied carrying handle Part Names of the ProjectorTop Features Terminal Panel Features Part Names of the Remote Control Remote Control Precautions Battery InstallationSelecting a Location Installation and ConnectionsSetting Up the Screen and the Projector Do not attempt to install the projector yourself Distance ChartThrow Distance and Screen Size Reflecting the ImageMaking Connections Connecting Your PC or Macintosh ComputerTo connect Scart output RGB Connecting an External MonitorRGB Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationAdjust the Tilt Foot Adjusting the Picture Size and PositionSelecting a Source Selecting the computer or video sourceAuto Keystone Correction Correcting the Vertical Keystone DistortionManual Keystone Correction FocusTo turn off the projector Turning Up or Down VolumeAdjusting the Image Using Auto Adjust Using the Remote Mouse Function Convenient FeaturesFreezing a Picture Turning off the Image and SoundEnlarging and Moving a Picture Getting the InformationBasic Menu Operation Using ON-SCREEN MenuUsing the Menus List of Menu Items Menu Elements Indicates the Control Panel Key Lock is enabledImage Menu Descriptions & FunctionsPicture Advanced SetupEnabling High Speed Fan Mode High Speed Fan Mode To disable the Security functionSelecting Signal Format Signal Select Page2 Enabling Power Management Power ManagementInformation DefaultTo replace the lamp MaintenanceReplacing the Lamp Cleaning or Replacing the Filter CleaningCleaning the Cabinet and the Lens To replace the filter spongePower Indicator TroubleshootingStatus Indicator Lamp IndicatorDoes not turn on Common Problems & Solutions Check These ItemsModel Number VT660K/VT560/VT465 Optical SpecificationsPin Assignments of D-Sub RGB Input Connector Cabinet DimensionsMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalSXGA+ Compatible Input Signal ListCable Connection Communication Protocol PC Control CodesServices offered with TravelCare TravelCare a service for international travelersTerm of warranty TravelCare GuideAsia and Middle East Service are offeredApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program

VT465 specifications

The NEC VT465 is a versatile and robust data and video projector, highly regarded for its advanced features and exceptional performance in a variety of settings. Designed primarily for educational institutions and business environments, the VT465 combines state-of-the-art technology with user-friendly functionality, making it an ideal choice for presentations, lectures, and collaborative work.

One of the standout features of the VT465 is its impressive brightness level of 3000 ANSI lumens. This significant brightness ensures that images remain clear and vibrant even in well-lit rooms, making it suitable for both small classrooms and larger conference rooms. The native XGA resolution (1024x768) provides sharp text and detailed images, essential for displaying intricate presentations or graphics.

In terms of connectivity, the VT465 offers multiple input options, including HDMI, VGA, and composite video, along with audio inputs. This versatility allows users to connect various devices, such as laptops, tablets, and video players, ensuring that presentations can be seamlessly integrated regardless of the source. Additionally, the presence of a built-in 10-watt speaker enhances the audio experience, providing clear sound for multimedia presentations without requiring external speakers.

The VT465 incorporates advanced DLP technology, known for its reliability and long lifespan. DLP projectors are less prone to color degradation over time, ensuring consistent image quality. The use of a high-quality RGB LED light source also contributes to an extended lamp life, reducing maintenance costs and downtime associated with frequent lamp replacements.

Furthermore, the projector features a user-friendly interface and an intuitive remote control, allowing for easy navigation of settings and options. Its compact and lightweight design ensures portability, making it convenient for users who need to transport the projector between different locations.

In terms of eco-friendliness, the VT465 includes features to reduce energy consumption. An automatic brightness adjustment function helps optimize power use, while the projector can enter standby mode when not in use, further conserving energy.

In conclusion, the NEC VT465 projector combines powerful performance with versatile features, making it an excellent choice for educational and professional settings. With its high brightness, multiple connectivity options, advanced DLP technology, and user-friendly design, the VT465 meets the diverse needs of users seeking a reliable presentation solution.