Connections, Application, Step | JBL CONTROL 2.4G manual

34199_Control_2_4G_Eng 02/08/07 14:07 Side 5

CONNECTIONS

Notes: For the sake of simplicity, throughout this manual we have used the term “source” when describing connections and operation. This would apply to any device such as an A/V receiver, audio component, computer or portable music player.

The JBL On Air Control 2.4G is designed for use in most countries worldwide, depending upon local regulations.

It includes 120V – 230V, 50/60Hz universal power supplies for the transmitter module and the active speaker. While we have included the two most commonly used AC cords with this product, your AC electrical outlet may require the use of a different AC cord. For your safety, it is essential to use an AC cord that is fully compatible with your local electrical system. When in doubt, please consult your local JBL dealer or distributor.

The JBL On Air may be connected to your source in several ways. First, determine how you would like to use the JBL On Air Control 2.4G; then follow the setup instructions for that application.

Application 1

Adding surround speakers to a home theater system.

Continue reading the instructions for Application 1 below.

Application 2

Adding speakers to remote locations around your home.

Application 1

Adding surround speakers to a home theater system:

Determine if your source contains preamp outputs for rear/surround channels, usually indicated by RCA-type jacks on the back of the receiver labeled as “surround preout” (please refer to your source’s owner’s manual to confirm whether it includes the preamp outputs). If your receiver includes these outputs, follow the steps below.

If not, connection is not recommended.

Note: Make sure power is turned off on all components.

Step 1.

Connect the interconnect cable (included) to the left and right surround/rear preamp outputs on the back of your source and the input on the transmitter module , as shown in Figure 1.

RECEIVER/PROCESSOR

Surround Channel

Preamp Outputs

R L

CODE

1 2 3 4 R INPUT L

Figure 1.

English

Step 2.

Determine the location of the surround speakers.

Subwoofer

Left Front	Center	Right Front
Channel	Channel	Channel

		Couch
Left	Left Rear	Center Rear	Right Rear	Right
Surround	Channel	Channel	Channel	Surround
Channel				Channel
	Subwoofer	Right Front
		Right Front
		Channel
	Center
	Channel
				Right
				Surround
Left Front				Channel
Channel
		Left
	Surround
	Channel

Figure 2. Place the active (left) speaker in the recommended location for the left surround speaker.

CONTROL 2.4G specifications

The JBL CONTROL 2.4G is a versatile and powerful audio solution designed for both professional and consumer-grade applications. Renowned for its high-quality sound and flexible connectivity options, this speaker system offers an exceptional listening experience tailored to meet the demands of various environments.

One of the main features of the JBL CONTROL 2.4G is its robust wireless technology. Operating on the 2.4 GHz frequency band, this speaker system allows users to connect wirelessly to a variety of devices, including smartphones, tablets, and laptops. This feature eliminates the clutter of wires, providing flexibility in placement and setup without compromising on sound quality.

The JBL CONTROL 2.4G is equipped with advanced transducers that deliver clear and accurate sound reproduction across a wide frequency range. The system features a 4-inch woofer and a 0.75-inch tweeter, ensuring deep bass response and a crisp high-end. This makes the speakers suitable for different audio applications, including music playback, movie watching, and gaming. Users can enjoy their favorite content with remarkable clarity, detail, and richness.

Another of the standout characteristics of the JBL CONTROL 2.4G is its versatile connectivity. In addition to wireless options, it offers multiple wired connections, including RCA inputs and a 3.5mm aux input. This feature enables users to connect various audio sources effortlessly, ensuring that the system can be integrated into virtually any audio setup.

The design of the JBL CONTROL 2.4G is compact and stylish. With a contemporary finish, these speakers easily blend into any environment, from home theaters to professional studios. Their lightweight design also ensures easy transportation, making them suitable for mobile setups or events.

Durability is another key aspect of the JBL CONTROL 2.4G. Built with high-quality materials, these speakers are engineered to withstand the rigors of daily use while maintaining their performance. This makes them an ideal choice for both personal and professional use.

In summary, the JBL CONTROL 2.4G stands out due to its wireless capabilities, superior sound quality, versatile connectivity options, stylish design, and robust construction. Whether for casual listening or professional applications, the JBL CONTROL 2.4G delivers a reliable audio solution that meets the needs of any audiophile.