NEC 5800 manual Cleaning the Server

Page 189

Maintenance 5-3

Cleaning the Server

For daily cleaning, wipe the external surfaces of the server with a dry soft cloth. Follow the procedure below if stains remain on the surfaces:

IMPORTANT:

!To avoid altering the material and color of the server, do not use volatile solvents such as thinner and benzene to clean the server.

!The power receptacle, the cables, the connectors on the rear panel of server, and the inside of the server must be kept dry. Do not moisten them with water.

1.Make sure that the server is off-powered (the POWER/SLEEP lamp goes off).

2.Unplug the power cord of the server from a power outlet.

3.Wipe off dust from the power cord plug with a dry cloth.

4.Soak a soft cloth in neutral detergent that is diluted with cold or lukewarm water, and squeeze it firmly.

5.Rub off stains on the server with the cloth prepared in Step 4.

6.Soak a soft cloth in water, squeeze it firmly, wipe the server with it once again.

7.Wipe the server with a dry cloth.

8.Wipe off dust from the fan exhaust opening on the rear of the server with a dry cloth.

Image 189
Contents EXPRESS5800/120Rb-1 Page EXPRESS5800/120Rb-1 Trademarks Proprietary Notice and Liability DisclaimerContents Setting Up Your System Configuring Your SystemInstalling the Operating System Troubleshooting MaintenanceAppendix D Equipment Log Upgrading Your ServerUsing This Guide Text Conventions Related Documents Safety Notices Safety Notices for Users Outside of the U.S.A. and Canada Care and Handling Chapter Overview Front View with Front Bezel Closed Front View with Front Bezel Removed Rear View Status lamp green/amber on the real panel Post lampsAC inlet To 8-5 right to left CD-ROM drive Disk bays Internal ViewIcmb connector PCI riser card connector System BoardDimm sockets for interleave memory Status Indicators Power LampStatus Lamp Status lamp Description Action Indication ACT Lamp Disk Access LampHard Disk Lamp LAN Connector Lamps Standard Features Power Supply Peripheral BaysSystem Cooling SAF-TE Logic System Board FeaturesProcessor MemoryPCI Riser Slots VideoScsi Controller Network Controller Network Teaming Features Preferred Primary Adapter RJ-45 Serial Port Keyboard and MouseSystem Board Management Controller BMC Degradation Feature Remote POWER-ON Feature Wake on LANAC-LINK Feature Software Locks via the Bios Setup Utility System SecuritySecurity with Mechanical Locks and Monitoring Using Passwords Feature Description Software Security FeaturesSystem Overview Expressbuilder System Diagnostic Utility OFF-LINE Maintenance UtilityEsmpro Management Workstation Application MWAFront Bezel Using Your ServerTab Frame Power Switch Post Post Execution Flow Press Ctrl a for SCSISelectTM Utility Power Off Identification of Servers ~ UID Switch ~ Floppy Disk Drive Write-protect switch Write Write disable enable CD-ROM Drive Rotor Press this part of CD-ROM Emergency hole System Overview This page is intentionally left blank Setting Up Your System Follow the flowchart below to set up the server Setup FlowInstallation Rack InstallationSelecting a Site Setting Up Your System Unpacking the System Assembling the RACK-MOUNT System ESD Precaution Restricted Access LocationChecking Components Required ToolsInstallation Procedure for NEC Rack or Vendor’s Rack Installing the Caged Nuts Installing the Rail Assemblies Front Rear Installing the Server Securing the Server Removing the Server from the Rack Assembly Setting Up Your System Connecting Peripheral Devices Front Connection to Serial Ports Connection between the Rear Serial Port and a Modem Setting Up Your System Connect the power cord to the server Connecting the Power CordExample Turning on the Server Setting Up Your System Installing Utilities Installing the Operating SystemMaking Backup Copies of System Information System Bios ~ Setup ~ Configuring Your SystemStarting Setup Utility Enter Description on On-Screen Items and Key UsageEsc F10To link power supply with the UPS Configuration ExamplesTo change the boot order of devices connected to the server To enable the memory degradation feature To clear the CPU error information To save the Bios configuration data Menu and Parameter Descriptions MM/DD/YYYY Option Parameter Description Your SettingProcessor Settings Advanced PCI Configuration USB Function Submenu Peripheral Configuration Configuring Your System Post Memory ConfigurationAdvanced Chipset Control Move the cursor onto Security to display the Security menu Sets the User access level when logged Server Power On State before powered off Parameter Stays OffSystem Management Submenu COM2 2F8 IRQ3 Console RedirectionEvent Log Configuration Submenu Boot Hard Disk Submenu Boot Device PriorityAtapi CD-ROM Drives Submenu Removable Devices SubmenuExit Configuring Your System Configuring Scsi Controller on System Board Using SCSISelect UtilityYou have an AIC-7899 EnterSelect Yes and press Enter to exit Menu item Parameter Description Scsi Bus Interface DefinitionsScsi Device Configuration Boot Device OptionsAdditional Options Submenu item Parameter DescriptionScsi Device Configuration Scanning Scsi ID 0 LUN Number Asyn Configuring Your System Configuring Scsi Controller on Optional Board Configuring System Board Jumpers Following describe the clearing procedure Configuring Your System This page is intentionally left blank Installing the Operating System About Express Setup Installing the Operating System Microsoft Windows Installation NoticeWindows Specifying Partition Size Disk Configuration Concerning the area displayed as Maintep Agree to Software License Agreement Restart Setup FlowInstalling Windows Using Blank disk Using the specified Configuration DisketteSecond Partition Deleted Third Retained Forth Installing the Operating System Installing and Configuring Device Drivers Install PROSet Adapter Fault Tolerance AFT/Adaptive Load Balancing ALB \MEMORY.DMP Setup for Problem ResolutionInstalling the Operating System Windows 2000 Dr. Watson Installing Maintenance Utilities Making Backup Copies of System Information Updating the System Applying Service PackMicrosoft Windows NT Windows NT 4.0 /Windows NT 4.0 EE Disk Configuration ↓ *2 Installing Windows NT Using the specified Configuration Diskette Installing the Operating System Installing the Operating System Installing and Setting Device Drivers Installing the Operating System Setup for Problem Resolution Installing the Operating System Dr. Watson Updating System Recovery Information Installing Network Monitor during OS Installation Installing Maintenance Utilities Making Backup Copies of System Information Installation Assumption Required DiskettesSupported Device Required Diskette Preparation Step Information Configuration ChecklistInstalling the Operating System Configuration Checklist Configuration Checklist Installing the Novell NetWare v5.0 Network Operating System Boards Backing Up the Server Restarting the ServerDevice Required Diskette SCO OpenserverChecking System Configuration Installing Optional Hardware SCO OpenServer Release Boot Installing and Configuring System SoftwareKeyboard Press Enter Password Installing the Operating System SCO OpenServer Release 5.0.6 Boot Press Enter to accept System displays the message Preparing Your Disk Enter appropriate choices Installation of Tape Drives Select Continue Mkdev fs mountall Making Backup Copies MaintenanceCleaning Cleaning the Server Cleaning the Interior Cleaning the Keyboard/Mouse Cleaning CD-ROM Test Items System DiagnosticsStarting and Ending the System Diagnostics Screen showing diagnostic result Local console RELOCATING/STORING the Server Follow the procedure below to relocate or store the serverTroubleshooting System Viewers Lamps Error Messages after Power-on Error MessagesOn-screen error message Description Action Post Error MessagesTroubleshooting 8111 Management controller does CPU Beep Codes Beeps Error Recommended ActionProblems with the Server Solving ProblemsFail to power on the server No screen display appears with beepPost fails to complete Fail to power off the serverDump and Sleep switches are disabled Keyboard or mouse fails to operate Fail to access to the CD-ROM Fail to access read or write to the floppy diskFail to access the hard disk Fail to access the internal or external Scsi devicesCannot install the operating system correctly OS presents unstable operation Windows 2000/Windows NT Fail to start the OSDescription D Cannot turn the power OFF at the blue screen WindowsServer is not found on the network OS presents unstable operation NetWareError Cause and Remedy Code Problems with ExpressbuilderComplete appears on the Role of Computer screen Problems with Express SetupComplete does not appear on Role of Computer screen Default Value for Windows NTUnable to specify the details of Network adapter Entered the incorrect Product ID/CD keyFor Windows NT4.0 Following message appeared during the installationUnable to create the partition size larger than 4GB Unable to uninstall Service PackError Message during Disk Array Configuration Problems with Configuration Diskette Creator Point to Point tunneling protocol cannot be setDetails of a network adapter cannot be set Windows Collecting Event LOGWindows NT Collect Configuration Information Collecting DR. Watson Diagnostic Information Memory DumpPreparing for Memory Dumping Saving the Dump File Backup Ipmi Information Recovery for Windows 2000/Windows NT System Press S when the following message appears Troubleshooting Recovery Procedure Windows NT Network-related Recovery OFF-LINE Maintenance Utility Starting the Off-line Maintenance Utility Features of Off-line Maintenance Utility Forced Shutdown Resetting the ServerUpgrading Your Server Safety Notes ANTI-STATIC Measures Preparing Your System for Upgrade Hard Disk Drive Device Installation or Removal ProcedureInstallation Air baffle Screws Drive carrier Upgrading Your System Upgrading Your System Take the following steps to remove a hard disk drive Upgrading Your System Upgrading Your System Server ~ Pull-out from the Rack ~ Upgrading Your System Top Cover Do not damage Cable by the tab Dimm Install two DIMMs in ascending order of paired-slot numbers Key slot Upgrading Your System Removal Processor CPU Upgrading Your System Lever Terminator Plastic portion Top View Groove Heat sink Bracket attached to the wire clip Groove in the heat sink Upgrading Your System Upgrading Your System Removal Upgrading Your System PCI Board Upgrading Your System Installation Extension slot cover Upgrading Your System Removal Disk Array Controller Board Installation Scsi ID2 Rear Front Upgrading Your System Upgrading Your System Upgrading Your System Mylex AcceleRAID 352 disk array controller Upgrading Your System Use of a disk expansion unit in a disk array configuration This page is intentionally left blank Express5800/120Rb-1 Appendix aSpecifications Peripheral Device Controller Appendix BInterrupt Requests IRQs Windows Device DriversSupported Device Required Driver Media Installing and Configuring Windows 2000 and Windows NT Information Required Enter Your Information Here Installing Microsoft Windows 2000 Operating System Driver Installation for the ATI Rage XL Display Adapter Installing LAN AdaptersDevice Required Driver Media Windows NTInstalling Microsoft Windows NT 4.0 Operating System Configuring RAIDInstalling LAN Adapter Drivers Driver Installation for the ATI Rage XL Display Adapter This page is intentionally left blank Hardware Appendix DEquipment Log FAT Hpfs Ntfs SoftwareThis page is intentionally left blank Glossary Process of loading the operating system into memory Central Processing Unit See microprocessor See backplane slot Bytes. See also byte 048,576 bytes. See also byte Power-On-Self-Test IC in your computer that maintains the time and date Type of storage device using magnetic tape This page is intentionally left blank Page 456-01578-000
Related manuals
Manual 20 pages 16.88 Kb Manual 68 pages 4.64 Kb

5800 specifications

The NEC 5800 series is a line of highly regarded enterprise servers that have made a significant impact in the data center landscape. Known for their robustness, scalability, and efficient performance, these servers are designed to meet the growing needs of businesses across various sectors. The NEC 5800 series incorporates a range of cutting-edge technologies and features that cater to both high-performance computing and data-intensive applications.

One of the standout features of the NEC 5800 is its modular design. This architecture allows organizations to customize their server configurations according to specific requirements, making it a versatile choice for a diverse range of workloads. The scalability provided by the NEC 5800 enables businesses to expand their operations easily, whether through adding additional resources or integrating new technologies as demands evolve.

The NEC 5800 series utilizes advanced Intel Xeon processors, delivering exceptional computing power and multitasking capabilities. This ensures that mission-critical applications operate seamlessly, even under heavy workloads. Additionally, the integration of large memory capacities allows for efficient processing of big data analytics and virtualization, enabling businesses to harness the full potential of their data assets.

Another notable characteristic of the NEC 5800 series is its energy efficiency. With rising concerns about power consumption and operational costs, NEC has incorporated green technologies within their servers. The series features power-saving components and intelligent cooling systems that optimize energy usage, providing significant cost savings over time while minimizing environmental impact.

In terms of reliability, the NEC 5800 series comes equipped with a comprehensive set of features aimed at maintaining uptime and data integrity. This includes advanced RAID configurations, redundant power supplies, and hot-swappable components that allow for maintenance without downtime. Such features are critical for organizations that require continuous access to their applications and data.

Security is another essential aspect of the NEC 5800 series. It incorporates various security measures, including hardware-based authentication and encryption, to protect sensitive information. With the increasing number of cyber threats, these security features ensure that organizations can operate confidently without compromising their data integrity.

In conclusion, the NEC 5800 serves as a testament to NEC's commitment to delivering high-performance, reliable, and secure server solutions tailored to meet the demands of modern businesses. With its blend of scalability, energy efficiency, and robust security, it continues to be a preferred choice for enterprises aiming to leverage technology for growth and innovation.