JBL L810 manual Troubleshooting, Review proper operation of your receiver/amplifier

Page 5

TROUBLESHOOTING

If there is no sound from any of the speakers:

Check that receiver/ampli- fier is on and that a source is playing.

Review proper operation of your receiver/amplifier.

If there is no sound coming from one speaker:

Check the “Balance” control on your receiver/ amplifier.

Check all wires and con- nections between receiver/ amplifier and speakers.

Make sure no wires are touching other wires or terminals and creating a short circuit.

Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

In Dolby® Digital or DTS® modes, make sure that the receiver/processor is config- ured so that the speaker in question is enabled.

Turn off all electronics and switch the speaker in ques- tion with one of the other speakers that is working cor- rectly. Turn everything back on, and determine whether the problem has followed the speakers, or has remained in the same channel. If the problem is in the same chan-

nel, the source of the prob- lem is most likely with your receiver or amplifier, and you should consult the owner’s manual for that product for further information. If the problem has followed the speaker, consult your dealer for further assistance or, if that is not possible, visit www.jbl.com for further information.

If the system plays at low volumes but shuts off as volume is increased:

Check all wires and con- nections between receiver/ amplifier and speakers.

Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

If more than one pair of main speakers is being used, check the minimum imped- ance requirements of your receiver/amplifier.

If there is no (or low) bass output:

Make sure the polarities (+ and –) of the left and right “Speaker Inputs” are connected properly.

Consider adding a powered subwoofer to your system for use with digital “.1” surround formats.

If there is no sound from the surround speakers:

Check all wires and con- nections between receiver/ amplifier and speakers. Make sure all wires are con- nected. Make sure none of the speaker wires are frayed, cut, punctured or touching each other.

Review proper operation of your receiver/amplifier and its surround sound features.

Make sure the movie or TV show you are watching is recorded in a surround sound mode. If it is not, check to see whether your receiver/amplifier has other surround modes you may use.

In Dolby Digital or DTS modes, make sure your receiver/processor is config- ured so that the surround speakers are enabled.

Review the operation of your DVD player and the jacket of your DVD to make sure that the DVD features the desired Dolby Digital or DTS mode, and that you have properly selected that mode using both the DVD player’s menu and the DVD’s menu.

Declaration of Conformity

We, Harman Consumer Group International

2, route de Tours

72500 Chateau du Loir

France

declare in own responsibility that the products described in this owner’s manual are in compliance with technical standards:

EN 61000-6-3:2001

EN 61000-6-1:2001

Laurent Rault

Harman Consumer Group International

Chateau du Loir, France 8/05

PRO SOUND COMES HOME

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA 8500 Balboa Boulevard, Northridge, CA 91329 USA

2, route de Tours, 72500 Chateau du Loir, France www.jbl.com 516.255.4JBL (USA only)

©2005 Harman International Industries, Incorporated. All rights reserved. Part No. 353334-001

JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.

Studio Series, Pro Sound Comes Home, EOS, PolyPlas, HeatScape, Symmetrical Field Geometry (SFG), IsoPower, FreeFlow and Straight-Line Signal Path (SSP) are trademarks of Harman International Industries, Incorporated.

Dolby is a registered trademark of Dolby Laboratories.

DTS is a registered trademark of DTS, Inc.

Mylar and Kapton are registered trademarks of E.I. du Pont de Nemours and Company.

Image 5
Contents Model L810 Speaker PlacementModel L820 Model LC2BI-WIRING Speaker SetupSpeaker Connections Models L810Model WALL-MOUNTINGPilot Holes L810 152mm L820 2 216mmLC2 SpecificationsReview proper operation of your receiver/amplifier TroubleshootingCheck the Balance control on your receiver/ amplifier PRO Sound Comes Home
Related manuals
Manual 8 pages 10.83 Kb

L810 specifications

JBL is renowned for its high-quality audio products, and its speaker models such as the L890, L810, LC1, L830, and L880 exemplify this commitment to excellence. Each model brings unique features and technologies that cater to different listening environments and preferences.

Starting with the JBL L890, this floor-standing speaker utilizes a sophisticated two-and-a-half-way design, incorporating a high-performance 8-inch woofer along with dual 5.25-inch midranges. This configuration ensures a wide frequency range and rich, detailed sound reproduction. The L890 is also equipped with a 1-inch titanium-laminate tweeter, allowing for crystal-clear highs. Its stylish design includes a beautifully crafted cabinet that helps to minimize resonance, enhancing the overall audio experience.

The JBL L810 stands out as a versatile bookshelf speaker, equally adept at delivering punchy bass and clear treble. It features a similar 8-inch woofer paired with a 5.25-inch midrange and the renowned 1-inch tweeter. Its compact size makes it suitable for smaller spaces while still providing an expansive soundstage. The L810 is engineered to perform well in diverse environments, making it an excellent choice for both music lovers and home theater enthusiasts.

In contrast, the JBL LC1 serves as a dedicated center channel speaker designed to complement the L-Series lineup. Its dual 5.25-inch woofers and a 1-inch tweeter ensure dialogue clarity and dynamic range during movie or TV viewing. This makes the LC1 an essential component for any home theater system, enhancing the overall cinematic experience with its precise sound reproduction.

The JBL L830 is another bookshelf model that emphasizes versatility and performance. This speaker combines an 8-inch low-frequency driver with a refined 1-inch tweeter, ensuring an extended frequency response and exceptional clarity. The L830's sleek design allows it to fit seamlessly into any décor, while its high-efficiency drivers make it easy to drive with various audio equipment.

Lastly, the JBL L880 is a larger floor-standing model designed for audiophiles seeking maximum impact and fidelity. This speaker incorporates dual 8-inch woofers, a dedicated midrange driver, and a 1-inch tweeter, resulting in a robust sound profile that delivers deep bass and shimmering highs. The L880's advanced cabinet design minimizes distortion and resonance, ensuring an immersive listening experience across a variety of music genres.

In summary, the JBL L-Series speakers, including the L890, L810, LC1, L830, and L880, represent a fusion of innovative technologies and aesthetic appeal. Each model is crafted to deliver exceptional sound quality, making them a solid choice for both casual listeners and audio enthusiasts. Whether for music or home theater, these speakers offer outstanding performance and reliability that JBL is known for.