Epson manual Getting to Know Your BT-0260 Printer Combo Adapter

GETTING TO KNOW YOUR BT-0260 PRINTER COMBO ADAPTER

BT-0260 printer combo adapter supports two interfaces which can be used to connect with your printer.

1). IEEE-1284 - It is a 36-pin male connector on the front. Connect it to your printer. If your printer hides its female connector inside its case, then you have to open it.

2). USB - It is a USB type A connector. You need to connect one end of the USB cable to BT-0260 printer combo adapter, then connect another end to the printer.

Note : If your printer supports both interfaces, we recommend you to choose just one to connect with BT-0260 printer combo adapter. If you connect BT-0260 printer combo adapter to both of them, 1284 interface will be the functioning one.

3). Apply power to BT-0260 adapter by using the 7.5V DC power adapter accompanied, it is also the only way to RESET BT-0260.

4). Mode button is used by the advanced user to configure the printer adapter for some special purposes, it is normally left unused. You also can refer to the Utility Manual in CD for how to use it.

FUNCTION OF LEDS DURING PRINTING

POWER LED

ƒPower LED turns on when POWER is applied to BT-0260 printer combo adapter.

BLUETOOTH LED

ƒBluetooth LED is blinking when Bluetooth link is established but no data is transmitted on the line.

ƒBluetooth LED is ON when PC is wirelessly sending data to printer through BT-0260 printer combo adapter.

PRINTER LED

ƒPrinter LED is ON when there is a USB or parallel (IEEE-1284) printer connected to the BT-0260 printer combo adapter.

ƒPrinter LED is OFF when no printer is connected.

ƒPrinter LED is blinking when PC is sending data to printer through BT-0260 printer combo adapter.

3