Epson V-1100 user manual Operating, Switch on the projector power

Page 24

Power Cable Connections and Switching the Power On/Off

There is an order in which the power cable is connected and the power is switched on/off.

Operating

1 Connect the AC IN connector of the projector and the power outlet using the sup- plied power cable.

The POWER indicator will light amber, the cooling fan will rotate at low speed, and the unit will enter the standby mode.

STATUS POWER

Lit amber

To wall outlet

Firmly plug in all the way.

S
TA	TUS
		P
		OW	ER
POWER
SOURCE
QUICK			AUTO
MENU			AUTO

AUDIO

VIDEO

MENU

PC

2 Switch on the projector power

Main unit operation: Press and hold the POWER button for a while.

Remote control operation: Press the POWER ON button.

ON POWER OFFSTATUS POWER STATUS POWER STATUS POWER

	Flashes green	Lit green
POWER	(Approximately 60	Power is on
POWER	seconds)

The POWER indicator changes to a flashing green and lights steadily after about 60 seconds. The projection screen brightens after about 40 seconds.

The projector is now capable of regular projection.

3 Switch on the power of the connected equipment

Note

When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached easily.

E-24

Image 24

Contents 1100 Important Safety Information PrecautionsInstallation Power SupplyCleaning Lamp ReplacementFire and Shock Precautions Carrying aroundMajor Features Sharp, clear pictureBeautiful reproduction of high-quality images from DVD Heightened effectiveness with picture in pictureTable of Contents Adjustments and Settings Table of ContentsMenu Operations MiscellaneousChecking the Supplied Accessories Remote control Includes one button batteryPower cable 1.8 m / 5.9 feet RGB signal cable Mini D-sub 15-pin, 2 m / 6.6 feetChecking the Supplied Accessories Accessories ProjectorNames of the Main Unit Parts PC connector E-18,19,22 Built-in Security SlotNames of the Main Unit Parts Audio jack E-23 Video jack E-21Infrared transmitter E-14 Freeze button E-31Mute button E-31 PIP button E-31Preparing the Remote Control Button Battery ReplacementUsing the remote control for the first time Replacement MethodRemote Control Range Preparing the Remote ControlSide View Top ViewConnecting the power cable and switching on the power FocusingAdjust the screen or video image Position the projectorPlacement Guide Screen Size and Projection DistanceScreen Size Designation Inches 200 Placement Guide Screen SizeWidth x Height Height h1 Height h2Connections with PC Connectors Personal Computers with a DVI ConnectorMonitor output Personal Computers with a Mini D-Sub 15-Pin Connector Monitor output RGB signal cable Supplied itemPersonal computer To Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Connections with Video Connectors Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Suppled item Video cable Supplied itemConnections with Component Signals When the Video Connectors are Y, Cb, and Cr ConnectorsWhen the Video Connectors are Y, Pb, and Pr Connectors Component cable Available as an optionConnections with Audio Connectors Video equipment, personal computerWhite Red Audio cable Supplied itemSwitch on the projector power Remote control operation Press the Power on buttonOperating Lit amber To wall outlet Firmly plug in all the wayPower Cable Connections and Switching the Power On/Off Unplug the power cableFinishing Adjustment of the Projection Screen Projection Screen Position AdjustmentAdjust the projection image to the screen Focus Adjustment Making Adjustments with the AdjustersAdjustment of the Projection Screen Raising the projection imageWhen Auto Source is On When Auto Source is OffGeneral Operation Input SelectionAutomatic Adjustment of Analog RGB Main unit operation/Remote control operation PressGeneral Operation Projects the input signal without pixel conversion Selection of Aspect RatioFull screen in a ratio Mum displayable sizeCancelling Video and Audio Temporarily Projecting a Sub-PictureFreezing a Moving Picture Sub-picture Main-pictureUsing the Quick Menu Remote control operationContent of Adjustments and Settings Adjustment Method Correcting Keystone Distortion of the Projection ScreenStraight on beforehand While viewing the screen, press the + button or the butEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesNo enlargement Approximately 2 times enlargement Movement Adjustment of the Volume Press the VOL button Volume adjustment display will appearMenu Operation Method Names and Functions of the PartsNames and Functions of Menu Screen Parts Menu Operation MethodPerforming Menu Operations Menu Display Press the Menu button to display the menuCursor Dark blue This condition allows selection of the item nameStone example of the description diagram When Icon is displayed and dependWhen a button is pressed, the image will also change Displays Icon. The sub menu will beCursor Press of the Menu button whileCursor is not displayed will close the menu DisplaySelecting Another Menu Name with Remote Control Operation When a sub menu is displayed, press the canPress the Cancel button again and cancel CEL button and close the sub menuInput Signal Menu Name Item NameName ImageStatus Factory Default Lamp Timer Reset Resolution Frequency Sub Menu ItemPicture Brightness / Contrast / Color / Tint / SharpnessItem Name Cursor Button Cursor Button Picture Adj. Picture Adjustment Picture Adj. / Fine Picture / H Position / V PositionFine Picture PictureReset Adjustment/setting value of the Image menu namePress of the cursor button forces the reset PositionColor GammaColor Temp Corrects for natural color tonesSelection contents at the time of YCbCr input Selection contents at the time of YPbPr inputColor System Color SpacePersonal Computer Signal Video SignalsView AspectFilter ProjectionView Keystone Horizontal keystone the dotted screen outlineSize Settings Position SettingsPicture in Picture Keystone SaveSetup LanguageAuto Source Auto Power Off SetupOperation when Function is On On ScreenMenu Position YPbPrBackground This function sets the display position of the menuWhite Balance Factory Default Lamp Timer ResetInfo StatusResolution / Frequency Lamp TimerThis function displays the lamp timer InfoWhen the Status Indicator is Lit/Flashes Temperature has become abnormally highLamp will not light up Fan is stoppedWhen the Status Indicator is Lit/Flashes It is timer to replace the lampLamps service life has ended Thermal ProtectorTroubleshooting Check the following matters before requesting servicingTroubleshooting Cleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeInstall the new lamp cartridge Install the lamp coverReset the lamp timer to zero Specifications OpticalElectrical MechanicalTable of Supported Frequency VesaCabinet Dimensions 141Unit mm inch 180