Philips audio players user manual Troubleshooting, Symptom Solution

Page 20

Troubleshooting

If a fault occurs, first check the points listed in the following pages. For further help and other troubleshooting tips, please also check out FAQs at www.philips.com/support.

If you are unable to find a solution by following these hints, consult your dealer or service center.

WARNING:

Under no circumstances should you try to repair the set yourself, as this will invalidate the warranty.

Symptom

Solution

Hang up

Press and hold [VOLUME +] and 2; simultaneously.

 

Your device will reset.

Cannot power up

Charge your device.

 

In case of device error, connect your device to the

 

computer. Use Device Manager to restore your device.

Device shows "Player problem"

Device / memory card error. Connect your device to the

 

computer. Use Philips Device Manager to repair your device.

Device shows IIIIIIII

You have transferred music tracks with Chinese, Japanese,

 

Korean or other languages to your device. You need the

 

corresponding fonts to display this information correctly.

 

Press Settings .Select Language. Select the source language

 

of the music tracks. Note:Your music still plays even this

 

information is not shown properly.

No sound when the 2; button is pressed on my PSA player

-You may have a weak battery. Charge your device.

-Check if your headphone plug has been inserted into the head phone jack of the unit completely

-When you press the 2; button, make sure that it is pressed and held for long enough until the display light up.

-Check if the volume is at an audible level. Increase the volume using the VOLUME + button.

-If psa is in pause mode, press the 2; button to resume playback.

-Press power/play/pause and Volume + simultaneously for 2 seconds. Your device will reset.

-If nothing works then try connecting your psa player to the computer and then start Philips Device Manager and select "restore" to rebuild the database and firmware image of the psa player

Cannot transfer from my PSA back to my computer

This is not an error.Windows Media Player can only transfer tracks from your computer back to your PSA but not the other way round, subject to digital rights management.

Device shows " ! " / "Connect to PC" Connect your device to the computer. Use Philips Device Manager to repair your device.

17

Image 20
Contents Digital Audio Player Contents About Philips Device Manager and Windows Media Player Register your product More information AccessoriesAbout your new product Connect and Charge Charging your deviceIf Songs Transfer More Slowly Over USB Indication of power level Powering on / offFront of device ViewBack of device Root menu NavigationMusic mode Searching for your desired musicPlayback Customizing playbackInstall Philips Device Manager and Windows Media Player Getting digital music onto your deviceRadio mode Select your FM regionUsing the stopwatch Tracking your workout progressUsing the talking stopwatch Using ShockLock during music playback Customizing settings Setting FunctionWearing player on your arm Troubleshooting Symptom SolutionSafety and Maintenance To avoid damage or malfunctionCopyright information Environmental informationDisposal of your old product ModificationsPage Technical Data Power supplyAbout Windows Media Player Install Windows Media Player and Device ManagerAbout Philips Device Manager Windows Media Player Search and add tracks to the Library Transfer tracks to your device Click on SyncTIP Add Tracks to a Playlist on your PC using WMP Delete Tracks and Playlists Edit Track Information Search for Tracks Upgrades Firmware UpdateAll media contents will be erased Device Repair