Epson EMP-S1H, ELPLP29 manual Condition Cause/Remedy

Page 45

Troubleshooting > When You Suspect a Problem

Warning indicator

lit

flashing

Not lit under normal operating conditions.

 

 

 

 

 

 

Condition

Cause/Remedy

s

 

 

 

 

 

Red

High internal temperature (overheating)

 

 

 

The lamp turns off automatically and projection stops. Wait for about 5 minutes without operating the projector.

 

 

 

After about 5 minutes have passed, unplug the power cable and check the following:

P.10

 

 

• Make sure the air filter and ventilation outlet are clear and that the projector is not positioned against a wall.

 

 

P.55

 

 

 

If the air filter is dirty, it should be cleaned.

When the power cable is plugged back in, the projector will return to its previous state. Press the [Power] button on the projector or on the remote control to turn it back on.

Red

Lamp problem

 

 

• Disconnect the power cable from the electrical outlet. Remove the lamp and check that it is not broken. If the

 

(0.5 second

lamp is not broken, re-install it. Reconnect the power cable and press the [Power] button on the projector or

 

the remote control to turn it back on.

 

interval)

• If the lamp is broken, please contact your dealer or the nearest address provided in the "International Warranty

P.57

 

Conditions" in the "Safety Instructions/World-Wide Warranty Terms" guide. (You will not be able to use the

 

 

projector until the lamp is replaced).

 

 

• Check that the lamp and lamp cover are securely installed. If the lamp or lamp cover are not securely installed,

 

 

the lamp will not switch on.

 

Red

Internal problem

 

Stop using the projector, disconnect the power cable from the electrical outlet and contact your dealer or the

 

nearest address provided in the "International Warranty Conditions" in the "Safety Instructions/World-Wide

(1 second interval)

Warranty Terms" guide.

Orange

High-speed cooling in progress

P.10

 

(This is not abnormal, but, if the temperature rises too high again, projection will stop automatically.)

 

Set up the projector in a place which is well ventilated and ensure the air filter and ventilation outlet are clear.

P.55

 

Clean the air filter.

 

44

Image 45
Contents Users Guide Provides terminology definitions. s Glossary P.63 Meaning of SymbolsFeatures Contents Front/Top Part Names and FunctionsControl panel Rear Ceiling mount fixing points Points BaseLamp cover s P.57 Air filter air intake ventRemote Control Using the Remote Control Before using the Remote ControlOperating range StorageInstallation Installation methodProjection distance and screen size Other installation methods Rear projectionCeiling projection Ceiling/Rear projection Connecting to a Computer Compatible computersLaptop connection When using a 5BNC port When using a Mini D-Sub 15 pin connectorWhen using a 13w3 port Projecting images from a computerConnecting to an external monitor Volume adjustmentPlaying sound from a computer Installing the driver Windows Presentation Remote ControllerCompatible computers BClick NextFiles that you are using Up / Page Down buttons Part Names and FunctionsClick button Double clickProjecting video images Connecting to Video EquipmentFor Composite Video DVD, VHS, Video games For S-Video DVD, S-VHS, Video gamesPlaying sound from video equipment ETurn on the power of the computer/video Turning on the ProjectorAConnect the computer/video GWait until the power indicator lights green FPress the Power buttonCPress the Power button again Turning off the ProjectorEUnplug the projector from the outlet Adjusting the projection size Adjusting the DisplaySetting the focus ATurn the focus ring to adjust the image focusAdjusting the projection angle APress the v or w buttons KeystoneProjector Selecting the Input SourceSelecting a colour mode Adjusting computer generated imagesFunctions for Enhancing Projection TrackinggAPress the Freeze button on the remote control APress the A/V Mute button on the remote controlMute FreezeProjecting in widescreen changing aspect ratio Zoom APress the E-Zoomz button on the remote controlR r r Configuration MenusMenu operation BPress the u or d buttons to select the Top MenuAPress the Menu button CPress the e button HPress the Menu button to finish GSet other items in the same wayImage menu Function listTracking g Contrast gColor Temperature g Reset menu P.42Sync. g Setting menu Sub menu Function Refresh Rate g Info menuSub menu Function Reset menu Power indicator When You Suspect a ProblemCondition Cause/Remedy Indicators provide no help on the next No images appear Nothing is displayed When the indicators provide no helpNo images appear Messages are displayed From the computer. s Supported Display Resolutions P.67Laptop connection P.12 S-Video/Video button. s Selecting the Input Source P.26Image is out of focus unclear Supported Display Resolutions P.67 Vertical stripes appear in the imageImage is distorted / Image contains interference Only part of the image is displayed large/small Details. s Supported Display Resolutions P.67Selecting the Input Source P.26 Widescreen changing aspect ratio P.29Image colours are poor, tinted green or tinted red/purple Replacement period P.57Setting menu P.38 Image is darkNo sound can be heard Power does not turn off after the Power button is pressed Remote control does not workCleaning the projector case CleaningCleaning the lens Projector CareCleaning the air filter BRemove the old battery and insert the new one ARemove the battery holderCReplace the battery holder Replacing consumablesLamp replacement period Replacing the lampBOpen the lamp cover FReplace the lamp cover Resetting the lamp operating time DReplace the air filter cover Replacing the air filterPart number Part name Use Optional AccessoriesELPMB18 =Progressive scanningg, i=Interlaced scanningg GlossarySdtv YCbCr Serial connection Cable FormatComputer Supported Display ResolutionsComponent Video Composite Video/S-VideoWeight SpecificationsAppearance Numerics IndexIndex Video port FCC Compliance Statement For United States Users General Notice

ELPLP29, EMP-S1H specifications

The Epson EMP-S1H is a compact, versatile projector designed to deliver exceptional performance for various settings, including business presentations, educational environments, and home entertainment. Known for its reliability and advanced features, it incorporates state-of-the-art technologies to enhance image quality and user experience.

At the core of the Epson EMP-S1H is its powerful 3LCD technology, which utilizes three individual LCD panels to project vibrant and true-to-life colors. This technology effectively eliminates the issues of color separation and rainbow effect common in single-chip projectors. With a brightness of 2500 ANSI lumens, the EMP-S1H ensures vivid images even in well-lit rooms, making it suitable for diverse applications.

The projector has a native resolution of XGA (1024 x 768), providing sharp and detailed images, which is particularly advantageous for displaying text-heavy presentations. It supports multiple aspect ratios, including 4:3 and 16:9, allowing users to easily switch between different types of content. The contrast ratio of 2000:1 further enhances the clarity of visuals, ensuring that dark scenes retain depth and detail.

The Epson EMP-S1H is equipped with a variety of connectivity options, including HDMI, VGA, and USB ports, allowing for seamless integration with various devices such as laptops, tablets, and Blu-ray players. The inclusion of a built-in speaker adds convenience for users, eliminating the need for external audio equipment in smaller settings.

User-friendly features are also a highlight of the EMP-S1H. Its easy-to-navigate menu system and remote control make it simple to adjust settings on the fly. The projector’s lightweight design and compact dimensions facilitate portability, making it an excellent choice for on-the-go presentations or occasional use in different locations.

Moreover, the EMP-S1H is designed with energy efficiency in mind. It features an eco mode that reduces power consumption, leading to longer lamp life and lower operational costs. This projector not only meets the demands of modern users but also supports sustainability efforts.

In conclusion, the Epson EMP-S1H is a highly functional projector that excels in delivering high-quality visuals, flexibility in connectivity, and user-friendly operation, making it an ideal choice for a wide range of viewing needs.