Epson 821 manual Press the Freeze button

Page 48

Functions for Enhancing Projection

47

Freeze

This function pauses only the projected images. The sound keeps playing without pausing.

The image source will still be playing back the images even while projection is paused, and so it will not be possible to resume projection from the point where it was paused.

PROCEDURE

Press the [Freeze] button.

The images will then be paused.

To cancel the pause, press the [Freeze] button once more. You can also cancel it by pressing the [Esc] button.

Remote control

TIP

•Pressing the [Freeze] button also clears configuration menu displays and help messages.

•The freeze function still works while the E-Zoom function is being used.

Wide-screen Projection of Images from Video Equipment (Changing the Aspect Ratio)

This function changes the aspect ratiog of images from 4:3 to 16:9 when component videog images, S-Videogor composite videog images are being projected.

Images which have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format.

When images in Squeeze	When images in squeeze
modeg are projected at 4:3	mode are projected at 16:9

PROCEDURE

The aspect ratio changes each time the [Resize] button is pressed.

Remote control

TIP

You can also make this setting using the "Resize" command in the "Signal" menu.

Image 48

Contents User’s Guide Notations Used in This User’s Guide Features of the Projector Colour mode functionFeatures of the Projector Easy to Operate Contents Using the Help Problems Solving SpecificationsAppearance IndexConnecting to a Video Source Preventing theft Password ProtectPart Names and Functions Part Names and Functions Front/TopControl Panel Rear Base Air filter air intake vent sp.84, p.89Remote Control Before Using the Remote Control Replace the battery cover Remove the battery coverInserting the Batteries Insert the batteriesUsing the Remote Control and Remote Operating Range Using the Remote ControlWhen suspended from the ceiling Remote Operating RangeOperating angle horizontal Operating angle verticalInstallation Setting Up the ProjectorScreen Size and Projection Distance EMP-821EMP-81/61 Screen Connecting to a Computer Eligible ComputersProjecting Images from the Computer If the Monitor Port is a Mini D-Sub 15-pin Port ExampleComputer Mouse used Applicable cable Moving the mouse pointer Left click Right click Drag and dropConnecting to an External Monitor Video images cannot be output to an external monitorConnecting to a Video Source Projecting Composite Videog ImagesProjecting S-Video Images Projecting Component Video ImagesUse the accessory computer cable to make the connections Projecting RGB Video ImagesIf the video signals are being input to the Video port Playing Sound from Video EquipmentPreventing theft Password Protect When Password Protect is enabledWhen Power on Protect is enabled on Setting Password Protect Enter the setting time as a number of up to 4 digits To set a password, select Password and then pressEnter a 4-digit password Re-enter the password that you entered in stepBasic Operations Connecting the Power Cable Turning the Projector OnTurning the Power On and Projecting Images Projector, use the remote control or projector control If more than one external device is connected toTurn off the power for the signal sources that are Press the Power buttonPress the Power button once more Turning the Projector OffIf not using the projector for a long period, unplug Power cable from the electrical outletAttach the lens cover Adjusting the Screen Image Adjusting the Image Size Zoom FunctionFocusing the Screen Image Adjust by turning the zoom ringSeen from the side Seen from aboveFoot adjust lever Front Manually Correcting Keystone Distortion Adjusting the Image Quality Adjusting Computer Images and RGB Video ImagesAutomatic Setup Adjusting the Tracking After making the adjustment, press the Menu buttonTo exit the configuration menu Adjusting the Sync Signal configuration menuProjectors control panel, and then select Sync. from Selecting the Projection Quality Colour Mode Selection Mode ApplicationAdjusting the Volume Advanced Operations Functions for Enhancing Projection MutePress the A/V Mute button Freeze Press the Freeze buttonAspect ratio changes each time the Resize button is pressed Zoom Press the E-Zoom buttonMove the cross to the area of the image that is to be Enlarged or reducedPointer function Tilt the button to move the pointer iconPress the Pointer button Using the Configuration Menu Functions List of Functions Image MenuRed GreenBlue Component videog/ Composite videog/ S-Videog Adjust the intensity of the red components Median value Signal Menu Sync.gUsing the Configuration Menu Functions Component videog Composite videog/ S-Videog Using the Configuration Menu Functions Setting Menu OFFUsing the Configuration Menu Functions Extended Menu MessageBackground Color Startup ScreenDirect Power on Sleep ModeUsing the Configuration Menu Functions Info Menu Reset Menu Sp.29Using the Configuration Menus Confirm the selectionPress the Menu button Select a menu itemChange the setting Select a sub-menu itemClose the menu Troubleshooting Using the Help Press the Help buttonRepeat the operations in steps 2 and 3 to proceed Through the menu to more detailed itemsProblems Solving Reading the IndicatorsPower indicator lights red Lamp or Temp indicator flashes orange Problems SolvingNormal When the Indicators Provide No Help Power does not turn on sp.81No images appear sp.75 Image is truncated large or small sp.79Problems relating to images Is Sleep Mode set to ON? Does the mode match the frequencyResolution of the image signals? Projection stops automaticallyIs the power for the computer or video source Turned on? Are the image signals being output toHas the focus been adjusted correctly? Is the keystone adjustment value too large?Has the correct resolution been selected? Have the Sync.g and Trackingg settingsBeen adjusted correctly? Interference or distortion appear in imagesZoom function? Has the Position setting been adjusted Has the Resize been set correctly?Is the image still being enlarged by Correctly?Do the input signal settings match the signals Has the image brightness been adjustedHas the image contrastg been adjusted Has the colour been adjusted correctly?Problems when projection starts Other problems List of ESC/VP21 Commands List of Supported Monitor Displays100 102Maintenance CleaningCleaning the Projectors Surface Cleaning the LensLamp Replacement Period When the Lamp indicator is flashing orangeReplacing Consumables Projected image gets darker or starts to deteriorateTurn off the projectors power, wait until the cool Buzzer sounds, and then disconnect the power cableReplacing the Lamp Down period has ended and a pip-pip confirmationTake out the lamp Install the lamp cover Install the new lampResetting the Lamp Operating Time Select Lamp-Hours Reset from the Reset menuThen press the Enter button Select Yes and then press the Enter buttonReplacing the Air Filter Install the new air filter Remove the air filterSaving a Users Logo Select User’s Logo from the Extended menu,Select Yes in the sub-menu, then press the Enter Image to be recorded and a selection marqueeBox will be displayed. Move the marquee box to select Part of the image to useSelect the zoom rate in the Zoom rate setting screen Select Yes at the confirmation screen, and thenPress the Enter button Optional Accessories and Consumables Optional AccessoriesConsumables Glossary Squeeze mode Resize displaySecurity lock SRGBList of ESC/VP21 Commands Command ListCommunication Protocol Cable Layouts USB connectionSerial connection USB Connection Setup List of Supported Monitor Displays Computer/RGB VideoComponent Video/RGB Video Composite Video/S-VideoSpecifications 100Specifications 101Appearance 102Index 103Index 104105 106 Declaration of ConformityGeneral Notice 107