Philips FWM779 warranty Programming the disc tracks, Press Program Prog to start programming

Disc Operations

Programming the disc tracks

Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order.

IMPORTANT!

It is only possible to program from the

current selected disc tray.

USB PC LINK AUX/GAME	2
1
VOL	4
	6
	7
DSC VACWOOX LEVEL	3 5

1Load the desired discs on the disc trays (refer to ÒLoading discsÓ).

2Press CD or one of the CD 1~5 buttons to select a disc.

3Press PROGRAM (PROG) to start programming.

➜ PROG starts flashing.

4Press í or ë repeatedly to select the desired track.

●For MP3 disc, press à / á (ALBUM 43) and í / ë (TITLE -+) to select the desired

album and title for programming.

5Press PROGRAM (PROG) to store.

●Repeat steps 4–5to select other tracks.

➜ If you attempt to program more than 99 tracks, ÒPROGRAM FULLÓ is displayed.

6To start program play, press ÉÅ.

7To stop playback or to end programming, press Ç once.

➜PROG stays and the programming mode remains active.

Notes:

–If the total playing time has reached 100 minutes or one of the programmed tracks has a number greater than 30,“—:—” is displayed instead of the total playing time.

–The system will exit the programming mode if no button is pressed within 20 seconds.

Checking the programme

1Stop playback and press í or ë repeatedly.

2Press Ç to exit.

OR

Press ÉÅto start playback from the current programmed track

Clearing the programme

●Stop playback, and then press Ç to clear the programme.

OR

Press the OPEN•CLOSE 0 button of the disc tray.

➜ PROG disappears and ÒPROGRAM CLEAREDÓ is displayed.

Note:

–The program will be erased if the system is disconnected from the power supply or you switch to another source mode.

English

23