Epson 1EMP-S1 manual Condition Cause/Remedy

Page 44

Troubleshooting > When You Suspect a ProblemEMP-S1 User’s Guide

Warning indicator

lit

flashing

• Not lit under normal operating conditions.

 

 

 

 

 

 

Condition

Cause/Remedy

s

 

 

 

 

 

Red

High internal temperature (overheating)

 

 

 

The lamp turns off automatically and projection stops. Wait for about 5 minutes without operating the projector.

 

 

 

After about 5 minutes have passed, unplug the power cable and check the following:

P.10

 

 

• Make sure the air filter and ventilation outlet are clear and that the projector is not positioned against a wall.

 

 

P.54

 

 

 

•If the air filter is dirty, it should be cleaned.

When the power cable is plugged back in, the projector will return to its previous state. Press the [Power] button on the projector or on the remote control to turn it back on.

Red

Lamp problem

 

 

• Disconnect the power cable from the electrical outlet. Remove the lamp and check that it is not broken. If the

 

(0.5 second

lamp is not broken, re-install it. Reconnect the power cable and press the [Power] button on the projector or

 

the remote control to turn it back on.

 

interval)

• If the lamp is broken, please contact your dealer or the nearest address provided in the "International Warranty

P.56

 

Conditions" in the "Safety Instructions/World-Wide Warranty Terms" guide. (You will not be able to use the

 

 

projector until the lamp is replaced).

 

 

• Check that the lamp and lamp cover are securely installed. If the lamp or lamp cover are not securely installed,

 

 

the lamp will not switch on.

 

Red

Internal problem

 

Stop using the projector, disconnect the power cable from the electrical outlet and contact your dealer or the

 

nearest address provided in the "International Warranty Conditions" in the "Safety Instructions/World-Wide

(1 second interval)

Warranty Terms" guide.

Orange

High-speed cooling in progress

P.10

 

(This is not abnormal, but, if the temperature rises too high again, projection will stop automatically.)

 

Set up the projector in a place which is well ventilated and ensure the air filter and ventilation outlet are clear.

P.54

 

Clean the air filter.

 

43

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Users Guide Meaning of Symbols Provides terminology definitions. s Glossary P.62Features Contents Part Names and Functions Front/TopControl panel Rear Base Ceiling mount fixing points PointsLamp cover s P.56 Air filter air intake ventRemote Control Storage Before using the Remote Control Operating rangeUsing the Remote Control Projection distance and screen size InstallationInstallation method Other installation methods Rear projectionCeiling projection Ceiling/Rear projectionLaptop connection Connecting to a ComputerCompatible computers When using a Mini D-Sub 15 pin connector When using a 5BNC portWhen using a 13w3 port Projecting images from a computerPlaying sound from a computer Connecting to an external monitorVolume adjustment Presentation Remote Controller Installing the driver WindowsCompatible computers BClick NextFiles that you are using Part Names and Functions Up / Page Down buttonsClick button Double clickConnecting to Video Equipment Projecting video imagesFor Composite Video DVD, VHS, Video games For S-Video DVD, S-VHS, Video gamesPlaying sound from video equipment DInsert the power plug into a wall socket ETurn on the power of the computer/videoTurning on the Projector AConnect the computer/videoFPress the Power button GWait until the power indicator lights greenCPress the Power button again DWait until the power indicator lights orangeTurning off the Projector EUnplug the projector from the outletAdjusting the Display Adjusting the projection sizeSetting the focus ATurn the focus ring to adjust the image focusAdjusting the projection angle Keystone APress the v or w buttonsSelecting the Input Source ProjectorTrackingg Sync.gAPress the A/V Mute button on the remote control APress the Freeze button on the remote controlMute FreezeProjecting in widescreen changing aspect ratio APress the E-Zoomz button on the remote control ZoomConfiguration Menus R r rAPress the Menu button Menu operationBPress the u or d buttons to select the Top Menu FSettings can be changed in the follwing ways CPress the e buttonGSet other items in the same way HPress the Menu button to finishFunction list Image menuContrast g Tracking gSync. g Color Temperature gReset menu P.41 Setting menu Sub menu Function Info menu Refresh Rate gReset menu When You Suspect a Problem Power indicatorCondition Cause/Remedy Indicators provide no help on the next When the indicators provide no help No images appear Nothing is displayedFrom the computer. s Supported Display Resolutions P.66 No images appear Messages are displayedLaptop connection P.12 S-Video/Video button. s Selecting the Input Source P.26Image is out of focus unclear Image is distorted / Image contains interference Supported Display Resolutions P.66Vertical stripes appear in the image Details. s Supported Display Resolutions P.66 Only part of the image is displayed large/smallSelecting the Input Source P.26 Widescreen changing aspect ratio P.29Image colours are poor, tinted green or tinted red/purple Signal s Image menu P.35Replacement period P.56 No sound can be heard Setting menu P.38Image is dark Remote control does not work Power does not turn off after the Power button is pressedCleaning Cleaning the projector caseCleaning the lens Projector CareCleaning the air filter ARemove the battery holder BRemove the old battery and insert the new oneCReplace the battery holder Replacing consumablesBOpen the lamp cover Lamp replacement periodReplacing the lamp FReplace the lamp cover ATurn on the power and press the Menu button ButtonReplacing the air filter DReplace the air filter coverOptional Accessories Part number Part name UseELPMB11 Glossary =Progressive scanningg, i=Interlaced scanninggSdtv YCbCr Cable Format Serial connectionSupported Display Resolutions ComputerComponent Video Composite Video/S-VideoSpecifications WeightAppearance Index NumericsIndex Video port FCC Compliance Statement For United States Users

1EMP-S1 specifications

The Epson 1EMP-S1 is a remarkable projector designed to cater to the diverse needs of both business professionals and educators. This versatile device combines advanced technology with user-friendly features, making it an ideal choice for presentations, lectures, or even home entertainment.

One of the standout features of the Epson 1EMP-S1 is its impressive brightness level. With a lumens rating that ensures vibrant, clear images in various lighting conditions, users can confidently present in well-lit rooms without the worry of washed-out visuals. The projector's high-resolution capabilities allow it to produce sharp and detailed images, enhancing the overall viewing experience.

The Epson 1EMP-S1 leverages advanced 3LCD technology, which is known for delivering exceptional color accuracy and brightness. This three-chip system ensures that all colors are reproduced with fidelity, making it an excellent option for showcasing graphics, charts, and videos. This technology also reduces the rainbow effect often seen in single-chip projectors, providing a more enjoyable viewing experience, especially during dynamic presentations.

Portability is another significant advantage of the Epson 1EMP-S1. Lightweight and compact, this projector can easily be transported from one location to another, making it ideal for traveling professionals or educators who frequently move between classrooms. Its simple setup process further enhances usability, allowing users to focus on their presentations rather than technical difficulties.

Connectivity options are essential for modern projectors, and the Epson 1EMP-S1 does not disappoint in this regard. With multiple input options, including HDMI, VGA, and USB, users can connect various devices effortlessly. This flexibility allows for seamless integration with laptops, tablets, and even smartphones, making it convenient for presenting a wide range of content types.

The Epson 1EMP-S1 also emphasizes energy efficiency. Equipped with features such as an eco mode, this projector can extend lamp life significantly while reducing power consumption. This not only helps save on operational costs but also contributes to a more sustainable usage model.

In conclusion, the Epson 1EMP-S1 stands out as a powerful and efficient projector equipped with advanced features tailored for both business and educational use. With its exceptional brightness, 3LCD technology, portability, versatile connectivity, and energy efficiency, it offers a comprehensive solution for anyone looking to enhance their presentation capabilities.
Top Page Image Contents